This surface will need some work, as it currently does not have a main drain located in the pool. Plaster is covering where the whole should be and covered the once existing hole. A new hole must be made in the plaster and extend piping all the way to the equipment pad in order to provide the required minimum one main drain suction line. Currently this pool is not up to code without a main drain. Adding a new main drain will cost a minimum of 2,000 upwards to 4 in order to install. As well the spa at the least will need a new main drain cover and to extend the piping towards the equipment under ground as it has been disconnected as well. In addition, this pool has no return lines located in the pool, or the spa. This will not allow the pool to get its needed circulation and attribute heavily towards algae and make it very difficult to keep clean and clear. New return lines will need to be drilled and extended under the ground towards the equipment pad regarding the spa and pool. Without return lines in the spa there will be no jets. In place of a skimmer there is 2 in. pipe placed over the grounded and leading into the pool serving as the sole suction line. This is a problem as there is no way to add a skimmer basket, highly increasing the risk of clogging your pump, and simply not accommodating the pool as intended. In place of any industry standard jets in the spa and pool there is a 2in pipe pushing out water. It is irrelevant whether the piping under the ground is leaking or functional as it is disconnected completely from the pool and spa. New piping will need to be added under the ground. In order to add the needed skimmer, return lines and all perspective plumbing on this pool and spa will cost a ball park of 10,000.

Cyaneric acid is too high, this pool needs to be drained. When the cyaneric acid is high chlorine is ineffective as a sanitizer and it is nearly impossible to keep algae free. To drain this pool and spa will cost 450, additional 200 to fill.

This skimmer is doing nothing currently it is disconnected from the pools circulation. Refer to surface segment for additional information.

This filter is around 3-5 years in age and should last years to come before any issues occur.

Installing a bonding wire will cost 65$ Without one this pool is not safe and up to code. It posses a much higher risk of shocking anyone around the pool equipment.

A gfci must be installed on the timer for the pool light in order to be safe and up to code.

This pool will need atleast two three way valves. One for the pool suction for main drain and skimmer. One other for spa and pool return. The cost of installing two valves will be a minimum of 500$ for parts and labor to install.