This pool was completely rebuilt in 2015. This plaster is about 2 years old, but looks like it was put in yesterday. It is in perfect condition.

This tile is of a very high quality ceramic. Currently, the tiles is flawless. There no chipped, cracked, lose or missing pieces of tile. Lastly, the tile has no calcium build up present, a reflection this pool has been very well kept.

This water is in excellent condition. It's being filtered by a D.E Filter know to filter the highest parts per million out of any filter. This water looks great and is clear and free of algae. Lastly, this water is balanced perfectly and has been filled with fresh tap water in the last 1-2 years.

The cleaner is working without issue. As well, it is only 2 years in age.

The auto fill is working perfectly without issue. It is new in age and in great condition.

Spa light is like new and I would expect this light to last another 5-15 years.

This filter was recently installed in 2015, and is still in like new condition. An issue with this filter is the need for an o- ring replacement on the tank seal. Currently, due to the bad seal water is leaking, but only at a very small rate to where drops come every few seconds. The only concern with this leak is the need to fill the pool 5 times as frequently. O-ring replacement is 85$. Lastly, this filter needs to be cleaned. Currently, the pressure is too high causing the heater to not get enough flow of water. Because of the low flow the heater is reading the error code lo. Indicating the heater needs more flow to work properly. Filter cleaning is 85$.

Spa jet pump is working like new, and is close to new in age. This pump was installed in 2015. Lastly, this pump has a grounding safety wire properly installed. This jet pump is 1 1/2hp, plenty of power for your enjoyment.

This heater is in excellent condition, and is only 2 years in age. It is heating the pool and spa, however the temperature is unable to be changed from the heater due to an error code. The error code is reading lo, indicating there is low flow of water coming into the heater. The filter must be cleaned to fix this problem. Once this error code is gone, you may navigate the heat once more.

This timer is one of the best ones you can get! It is new in age being installed in 2015, and as well still in great condition. This timer is currently malfunctioning to turn the spa light on a timer. This timer is still under warranty, and I recommend having a warranty technician come take a look and correct the issue.

This pool needs a new salt cell in order to work once again. Salt cell replacement will cost 655$.

This pool is equipped with electronic jandy 3 way valves with actuators. All valves are in perfect operating condition and have no issues at this time. These valves were recently installed new in 2015.