Fencing does not self latch when self closing. Recommend minor repair ($125).

The surface is in good condition overall. There is one area of concern at the skimmer opening , where past plaster repair occurred. This area may need additional work ($100-250) to guarantee its water tight status. Recommend plaster service.

No loose or missing tiles.

Ideal water quality. I personally think this water is perfect for the impending summer season.

Skimmer is in good working condition. It is missing it's skimmer float ($55) and the weir is in poor condition ($45). Recommend replacing both to bring back to ideal.

The main drain covers are not vgba conpliant and in need of replacement with complaint covers ($88each x 4 two pool main drains and two skimmer equalizer lines).

The bottom cleaner is in the shop for repairs.

Ideal working condition, no issues present.

It appears there is not only water inside the light lens assembly for this light ($575 needed for light replacement) but the light switch as well as the gfi plug are in need of replacement ($175) along with the light can.

The filter is in fair to poor physical condition and will need to be replaced ($1275) in the next 12-48 months (due to a band clamp $225 manufacturer defect). The fact that this system runs a 2nd story water solar grid adds to this issue. Recommend cleaning the filters ($85) to allow this filter to last as long as possible. Otherwise cartridge replacements will be needed as soon as well; 2-12 months ($255).

Hot filter pump motor with bearing whine during start up. Recommend at least servicing the motor ($255) or replacing the motor ($555) with like model energy efficient in the next 1-24 months if you do not service the bearings.

Water fall pump is in fair working condition however poor physical condition. Motor metal is degrading. Heat level of 2 out of 4. I would recommend servicing this motor as well ($150) when servicing the filter pump.

The timer is working currently, however with a replacement timer ($185) this timer can actually be read and used. Currently it's been overheated (common issue with this timer) and can no longer function correctly.

Otherwise all items are working installed.

This solar controller is in good working condition to use manually. However for this product to be most effective and automated it needs to have the solar water temps sensor replaced ($105 + service ($155).

All movable valves installed need to be opened cleaned lubricated and resealed due to age ($275). All piping needs to be sanded and painted to ensure another 10 years of UV protection ($175).