The fencing needs to self close and self latch.

Little discoloration found. No tear marks. Two areas of concern. One in the corner pictured where a patch was used. Recommend servicing this section in 12-72 months ($250). The second section is where the step ladder is running the bottom support areas against the surface with its sharp edge. Recommend finding the proper caps to avoid damage.

Water needs phosphate treatment to remove leaf debris dissolved inside water ($85).

Skimmer is a bottom cleaner only skimmer and could / should be converted to a main drain capable skimmer as well (a device that should be installed ($85) that allows both skimmer and main drain to function.

Main drain is a VGBA compliant cover however there is only one installed and not two and therefore makes this a non vgba compliant drain and for safety should be upgraded ($350) especially when the pool is drained next.

Unit is in fair to poor condition; the hose and all parts are near failure, recommend replacement in 1-12 months.

Recommend "the pool cleaner" or pentair a version ($405) as a high quality replacement.

Auto fills manual fill valve is broken and needs replacement ($125) to allow standard operation.

Filter has 1-7 more years of life before replacement will be necessary ($675).

As of now the filter element ($250) needs replacement in 1 -12 months. This may resolve a low flow issue with the bottom cleaner. Once the filter element is cleaned or replaced it may most likely resolve the bottom cleaner to work most efficiently.

This filter pump motor has 1 - 12 months of life left and will need replacement ($575) but a whole Pump Replacement is recommended due to condition of pump body ($775) or a variable speed upgrade for energy efficieny ($1275).

Timer is in good working condition.

This like new unit is in working condition. It however has either 1. A bad temp sensor on the roof ($255) or a bad temp sensor on the equipment pad ($235) causing this unit to not detect temp changes and therefore not function automatically. Instead only manually for now.

All valving and unions needs to be opened, cleaned, lubricated, and re sealed ($110 x 7).

One solar check valve is no longer working and needs to be replaced ($225).

Equipment pad and pipes needs to be re painted for uv protection ($175).