Needs to swing away from the pool. Self close and self latch. Or be locked.

Some missing tile on the waterfall area, a minimum charge tile repair. If done yourself approx $10-50 in materials or approx $255 service.

The tile has minimal calcium build up. Attempt a pumice stone cleaning otherwise a calcium cleaning would work ($450) for entire pool and fountain area. Approx $200 for raised area only.

Cynuric Acid needs additional adjustment. Calcium hardness is also slightly high. Recommend adjustments to each with a phosphate treatment.

Skimmer is in working condition. No missing pieces. However the float valve o ring is worn and the float ($58) should be replaced for standard maintenance.

The main drain is working however the covers are not vgba compliant $88 x 2. However the installation of the main drain (2 dual drain setup) is compliant. Therefore recommend upgrading the covers are for additional safety.

Good Working Condition. Minor maintenance parts $45-105; tail, sponge, possible wheel bearings in 6-12 months.

In great working condition.

All pool lights (led) are working and connected to a light plug gfci and a non gfci light breaker. Recommend upgrading this for non required safety $105.

This filter is in great physical condition. However the filter elements needs to be cleaned ($55-85) asap and or replaced ($500) if the pressure doesn't drop below 12 psi when running speed 4 (3200 rpm) after cleaning. Also the pressure gauge needs to be replaced ($55).

The filter pump has a few small minor leaks that need to be cleaned, lubricated, and re sealed ($55).

Otherwise this pump is in great condition.

This booster pump has a small leak on its return fitting. That can easily be repaired by opening, , cleaning , and re sealing ($55) to allow a leak free operation.

Otherwise this unit is in great condition.

This timer board needs an upgraded gfci breaker for the pool lights if it's 240 / 120 v but since this is a 12v led setup there is no code need for a gfci breaker, however I recommend upgrading for safety $105 (estimated under pool light repairs).

Otherwise there are no additional issues.

Chemical control unit (ph) intellichem is in great working condition.

The salt system appears to be functioning regardless of cold water (unit shuts down automatically at 55-65 degrees).

Note the salt level is low approx 4-10 bags. Recommend increasing salt mid January.

All valving is in fair to good condition. Note however due to the low acidic nature of the injection system, the injection could be enabled further down the system and should include a check valve, this will help with equipment wear (already present; leaky o rings).

Since the valves are all in fair to good shape I'd recommend opening cleaning and re lubricating all seals installed to ensure longevity of the valving.

Additionally there is one connection (acid return fitting) that is failing, and leaking, recommend Replacement fitting ($10-20).

Also recommend painting the plumbing pad as well ($55).