The pool surface is overall in good shape. No cracks present at this time and no need for repairs.

No loose or missing tile.

Algae present. Recommend treatments to eliminate growth.

Skimmer is in working condition.

The main drain is in need of a cover upgrade ($88x2).

Recommend minor service ($45) + parts ($65) to bring cleaner to like new.

Auto fill float is working , however the manual shut off valve is leaking and in need of repair of o rings ($125).

Both light cans appear to have water inside lens. Recommend replacement ($550 x 2).

The filter is in fair physical condition.

The pressure could not checked because of a bad filter pump motor.

Elements typically cost ($255) to replace.

And the pressure gauge will need replacement ($125) in 1-12 months as it's sun beaten and will no longer function soon.

The filter pump motor has most likely failed and it appears someone removed a wire connection to avoid turning it on. Replacement motor and service approx $750.

The waterfall pump has a broken pump lid ($125) and should be replaced for proper operation. At that time the pump can be properly tested.

Board and remote work and operate the swimming pool. All temperature gauges work.

Recommend repairing the pool lights then testing the breakers as they're currently not functioning correctly. May only be because of lights being under duress.

The salt could not be tested due to a non working filter pump. However salt system powers on with main control panel. And salt cell does not look older than 7 years so unit should be still in working condition.

All valves are in need of paint and lubrication. Recommend re repaint ($155) , seal service ($355) , and in 2-10 years replacing the valves (red gate valves) with Jandy 2 way never lube valves ($555) for deck jet isolation of flow (height balance).