Safety Fencing does not self-close and/or self-latch ($125)

The surface has a few rust stains that appear to be surface level. Recommend the surface to be treated ($155) to determine if the rust is surface or from below and a larger issue ($750).

There is one missing tile near the skimmer opening. Its opening is also showing signs of grout wear. Recommend re grouting ($325) and tile repair this skimmer to ensure no water loss is present.

The water needs its Calcium Hardness, Cya, and Chlorine adjusted, this may require the pool to be 1/2 drained ($250) service ($15) water cost.

The main drain cover appears to be VGBA compliant due to its 10" size and anti-entrapment design, recommend upgrading to new VGBA standard cover when next drained.

The unit needs adjustments as its currently under-powered and spinning in circles in the deep end of the pool. Recommend minor adjustment ($55).

The auto fill valve at the house is leaking when in use. Recommend repair to resolve this issue.

The pump is in excellent condition overall, however due to the unusual motor sizing (hp.5 sf 1.99) I would expect this warm motor to need bearing service ($255) in the next 1 - 24 months to ensure long life.

Otherwise this unit should lasty another 7-15 years.

The hose connections on this pump have water loss present. Recommend connections replacement ($175).

There are two timer clocks installed in good working condition. However they are not connected via a remote wire, recommend doing such to ensure tandem operation, which is required ($155).

Also the GFCI plug is not in working condition, and there is no light GFCI breaker. Recommend upgrading these to ensure safety ($255).

No valving installed.

Equipment is not painted, however, it is covered.