This fencing should be removed, due to being unsafe and not up to code. It should open directed away from the pool, and be self closing and latching; this gate is neither. Due to the gate being forever incapable of closing in the right direction because of the equipment blocking it, we should remove the gate.

This pool has a considerable amount of discoloration present, as well as chipping and major chipping around the light. For the most part the issues are cosmetic, except for a possible stuctural issue at the pool light. A leak detection is recommended to determine if this pool is leaking. A detection is also recommend due to the sheer age of this pool. To resurface this pool with pebble tech and re do the tile would be 7,000. A leak detection is 355.

This pools tile overall is in good condition with no missing pieces, however there are some sections of chipped and cracked pieces. There's a considerable amount of calcium build up that may be removed with a cleaning service.

This water is chemically balanced well. There are currently no signs of algae and this water is very clear.

Both skimmer and main drain posses excellent suction and flow of water with no issues present at this time. Main drain covers are vgba compliant and safe and up to code.

Light requires bulb replacement.

Light requires bulb replacement.

This pent air d.e filter is working great, and has no issues at this time. This filter is 5-10 years old and should last many years to come. Currently all of its 8 grids inside the filter are in great condition and won't require replacement for 1-5 years. This is a great filter, and is rated to filter the water the highest parts per million out of any other pump on the market. This pump is equipped with a backwash valve, a handy addition allowing the filter the be self cleaned and thus cleaned by hand much less often.

This spa jet pump is a one speed whisper flow pump, of which is close to new in age and condition. The pump works great, has no issues and is safe. To replace this pump with a variable speed pump would cost 1335 for the pump and an addition 245 for labor. This current pump may replace the spa jet pump in order to make this equipment run more energy efficient.

This booster pump requires replacement in order to operate the bottom cleaner once more. The 3/4 hp centurion pump is 345 plus labor of 235

This pump requires replacement. A new pump is 735 for parts, and an additional 235 to cover materials and labor. In this case it's recommended swapping the filter pump and installing it in place of the jet pump. They are the same pump. In this case it would 235 to replace it for labor. The filter pump will be replaced with a new variable speed energy efficient pump.

This heater is working great, and is close to new in age and condition. Currently this heater is missing a grounding wire. One should be installed immediately to make this heater safe and to comply with California safety code.

These two yellow dial timers are working well and have no issues at this time. Both are responsible for turning on the filter and the spa jet pump.

this system has three pent air three way valves, all of which should have an air leak repair for 85 each, a total of 255. One of the ball valves should be replaced due to barely turning.135