The best self closing self latching system I've ever seen.

The pool surface has several areas where plaster is exposing its internal structure support. To repair these exposed section(s) expect a cost between $1000-1500.

To repair and replace the entire surface and affected areas expect a cost of $5500.

Currently because of this rebar issue this pool is not water tight. Recommend repair.

The tile is in good condition with no loose or missing tiles.

There is light to medium calcium build up. Can be removed for approx $450.

The water is clear and blue with no algae present.

The skimmer basket, float, and skimmer weir all need replacement and are not in working condition ($193).

The skimmer is in poor condition. It had decades of chlorine tablet abuse. I would expect replacement required in 1 -10 years ($1100).

The main drain is not a VGBA compliant cover ($88) and should be updated for safety.

The bottom cleaner is in fair condition. It currently is in working condition, but It should be opened, cleaned, and tuned up ($105) to ensure 100% operating condition for the windy winter.

There is no issue with the auto fill.

The light is not in working condition, the breaker is active and the light is not on via switch inside the house. Recommend light can replacement ($575).

The filter pressure is slightly high, recommend cleaning.

There are two leaks in the filter tank, both need attention, recommend service call to re seal ($125).

The filter pump motor is worn and running very hot. Recommend replacment ($550).

The timer is in good working condition.

The breakers are in good working condition, however old, recommend replacement in the next 1 - 5 years ($255).