The gate was not accessed, instead the garage side door.

Full service is in good to excellent condition. I do not see any pitting or scratches present. I would expect this plaster to last another 10-25 years if well maintained.

The tile appears to have been recently cleaned, It may have very light build up on the tile surface / grout now that can easily be removed via water treatment ($45) or pumice stone ($35). Otherwise it is in great shape.

Recommend sealing the brick and grout on the decking. To help preserve the brick and mortar life.

There is no algae present. However there is a lot of foliage and debris around the pool. To guarantee clean working pool water recommend treatments to eliminate all organic growth from the water.

The skimmer needs a new weir, float, and the float seal needs to be installed IF the skimmer is being used to divert flow via main drain through the skimmer opening;100-150.

The main drain appears to have a vgba cover however the entire main drain appears not to be up to date on the latest efficient and safety standards; vgba complaince. Recommend updating this drain area for safety (est cost $450).

The bottom cleaner is in good condition. You can tell it has been well maintained. It will need approx $55 in parts today (wheel caps, tail sponge, one or possibly two hose swivels. And only another 50-100$ over the next 1-10 years.

The light is in good working condition at this time it did not appear to have any condensation on the inside lens.

The filter appears to be functioning as normal however there are many signs of this filter will fail in the next 12 to 48 months; rust, leak residual, and de filter grids may need replacement in the next 1-48 months ($200). The push pull back wash valve also is difficult to turn and will need replacement in the next 1-6 weeks ($150).

The filter pump has two links one is located in its pump body of the repair this a needs to be replaced with an estimated cost of 150 to 250 $, also recommend motor replacement at that time as well due to the old motor being worn and slightly hot ($250).

Booster pump appears to be in good working condition at this time with no leaks present however the suction side hose connection is faulty and will eventually need to be replaced in the next 1 to 24 months ($105).

Both timers are in fair to poor working condition and one timer is missing it's plastic wiring protection sheet, recommend installing one as soon as possible ($15).

It also does not appear that the pool light is connected to GFCI outlet or breaker recommend installing one for safety ($210)

Overall the valves installed here are old and outdated and cannot be used properly at this time recommend installing new valves for both the skimmer and the main drain sections ($526).

Also consider uv painting this equipment to ensure long life; $155.