The safety fencing is not self closing self latching.

The vinyl surface is in good to great condition.

It appears the vinyl was laid over exposed dirt vs plywood structure. This is a lower cost solution to constructing a pool such as this. However when it comes time to drain the pool to re vinyl or perform other repairs the ground around the surface will and may collapse inward as a result of loose or wet ground. Note this is only worst case.

Since the vinyl was installed this way the surface is more rough and will lend itself to tears or cuts.

Use caution with this pool; no sharp toys or tools; especially once the age of the surface reaches 3+ years.

Also do not OVERCHLORINATE this pool. It will greatly reduce the life of the surface. Recommend no chlorine over 3.0-5.0 for long periods of time.

There is no tile present.

The water quality overall is fair to good. Only minor adjustments needed; $55 + algae chemicals $150

The skimmer uses a flap / flange divertor from the skimmer to the main drain. This is currently installed and appears to be working.

The main drain is not vgba compliant and will need to be upgraded for safety.

The bottom cleaner hose needs to be replaced. It is cracked, backup valve not quite working and the hose swivels are not working properly. Expect a cost of $210 for the hose replacement + mild tune up on the bottom cleaner ($110).

The auto fill is in good working condition.

The pool light does turn on and function. However there is clearly water residual inside the light lens. This will need complete replacement in 1-12 months.

The filter is in good overall condition.

The multi port backwash valve is in damaged condition. Recommend replacement ($150). Vs repair of sight glass ($35) as the sight glass may not be the only issue.

The backwash line and hose are also in good condition.

The filter pump is hot! And this may be due to high filter pressure. Recommend cleaning the filter via backwash and then re confirming motor heat.

Regardless I feel the motor will need replacement in the next 1-48 months due to its heat expiration. Est cost for new pump motor installed $555

The timer board is in fair to poor condition.

The pool light GFCI is failing or needs replacement soon. Recommend replacement ($155).

Overall the valve are in fair to good condition. However the o rings on this valve need to be opened, cleaned, lubricated, and resealed every 10 years. This does not appear to have been done. Recommend this service ($155).

This pad does need to be painted ASAP to avoid uv exposure. $155.