Access was through home

The plaster surface is chipping and no longer water tight.

Recommend re plaster asap before water leaking through gunite shell becomes a major issue.

There are no loose or missing tiles present.

There is significant calcium build up on the tile surface recommend tile cleaning.

The water chemistry is out of balance. Recommend correction of $100-150 in chemicals.

The skimmer is currently in working condition.

The main drain appears to be in working condition as well.

The skimmer Float is in fair condition. However not needed due to an independent main drain line + independent skimmer line.

The bottom cleaner is in fair working condition currently, however due to poor quality in its It's hose, this should be replaced soon. Also it's body could be tuned up as well ($250+) to ensure 100% operation. It's currently running at 40-50% efficiency.

The auto fill is in working condition.

The light is not functioning at this time; $575 for replacement.

This cartridge filter is in fair condition; high filter pressure, algae in the water; recommend replacement of elements ($250).

The filter pump is in good to fair working condition; however the motor is very hot and needs replacement in the next 1-48 months when failure will occur; $575.

The booster pump is in fair condition.

The booster hoses appear to be ok good condition, however one hose has a significant leak and needs to be reconnected using Teflon tape.

Approx repair cost $125.

The heater is in fair working condition. The top vent is covered with debris. Recommend cleaning and gas line given a "gas sediment trap" line ($55-125 service call).

All timers and solar controllers are working.

However the wiring on these all have been modified to the solar controller controls all. I would recommend removing all and upgrading to an easy touch or a sun touch controller ($755-1500) to ensure proper operation.

Valves need to be replaced immediately. They cannot be controlled or serviced; $755.