Non closing. Non latching. This gate needs minor repair to be a safe access point.

The pool surface is in fair to good condition, with no cracks or missing portions of plaster.

Note this plaster if maintained well should last another 7-20 years without issue.

Recommend sequestering agent to strengthen plaster life $45.

The tile is in overall good condition there is no loose or missing tile found at this time.

There is calcium buildup present to remove expect a cost of $450.

Overall the water quality is clear, however it is in damaged condition and will need adjustment.

The cyanuric acid is too high and will need to be lowered via chemical ($105)

The chlorine is too high for the cyanuric acid treatment, recommend lowering ($55)

The ph and alkalinty are high, recommend slight adjustment ($15)

And the calcium hardness is slightly high, this is normal for the age of the pool. No change recommended at this time.

There is foliage in the skimmer basket and lots of trees surrounding the pool, recommend enzyme and phosphate treatment and filter cleaning ($155).

The skimmer is in good working condition at this time.

The main drain is not VGBA compliant and should have it cover replaced ($88). Otherwise this drain is in good working condition.

The bottom cleaner is in good working condition however due to the heavy discoloration of the unit I would expect many internal parts (bearing, swivels, etc) to need replacement, expected upgrade costs ($255) + tune up service $45

The Auto fill is not an updated float and does not function within the tile design area. Upgrade recommended ($55).

Light is in good working condition.

The gfci is in working conditikn.

And the light switch is also in good working condition.

Slightly high filter pressure, recommend cleaning filter element ($55), as well as clean and lubricate the tank o ring ($55)

The filter pump is in damaged condition. The motor is in good condition, however the filter pump body appears to have a split in the upper return side of its body. Recommend replacement of this body section ($450) or repair the return fitting ($155) as I feel it may be just the return fitting. I do feel 90% positive that it is the whole pump body that will need replacement.

The booster pump is in like new condition, however due to a poorly designed and installed suction side this pump is running very hot and inefficient. Recommend re plumbing the suction side of this pump or this pump will fail in 1 - 6 months ($155).

Note this design issue is what most likely caused the previous pump to fail.

The timer is in poor working condition. Expect these two yellow dial timers 220v to fail in 1 - 3 years (325). For now install a lead protection sheet on the left timer ($32).

Overall there are no valves installed here. This pad does need to be UV painted to protect the fittings from the sun ($125).