Does not self close or self latch

The surface of the pool is in poor and damaged condition. There are cracks and pits and exposed gunite throughout. Recommend replacement plaster ASAP ($4500-5200) as well as potential structural reinforcement issues ($800+) (ie rebar has been exposed in several locations to water). Recommend a structural engineer review these photos as well as a plaster & pool company to confirm exact pricing to confirm a working pool body.

The tile is worn and will need to be repaired or remodeled soon. I would expect approx $660 in repairs currently. And $520 in calcium removal. Or replacement would be $2000-2500.

Overall the water quality is in fair to good condition. I would expect only a minor ph and alkalinity adjustment to be performed to bring this pool back to ideal.

The skimmer is missing its float seal plate o ring ($105
Its also needs its float to be replaced ($58).

The main drain cover is not compliant, expect a VGBa compliant cover to run $88.

The bottom cleaner appears to be in great working condition. Approx 1 - 12 months old. Needs tails sponge $25.

The autofill valve is leaking and in need of replacement + repair ($155)

The two pool lights did not have power. Therefore they could not be tested, however due to the age and the condition inside the lens I would expect these two lights to need replacement in the next 1 - 24 months regardless of condition ($575 x 2) .

This Sta-Rite System 3 Cartridge Filter is in fair condition. I would expect that the elements are in fair shape, however these elements need to be cleaned every quarter ($85) at that time recommend inspecting elements and determining if replacement is necessary ($350-450).

This filter pump is not powered at this time. However due to the age of the pump and its current condition, I would expect this pump to last another 1 - 24 months before the motor may need to be replaced ($550)

Booster is in very poor physical condition. Recommend Replacement as this booster, if working, will only work another 1 - 36 weeks $555

This Sta-Rite System 3 Natural Gas heater is in damaged condition.

If power is restored I would expect a cost of $100 to replace the button cover, $35-4500 to replace electrical components. However once repaired, I would expect this unit to last another 1 - 10 years without any major issue. Quality product overall.

At minimum this pool needs a working timer clock, it does not appear to have a timer clock at this time. Recommend installation of such $355 + breakers $205 and conduit ($225).

Valves and connections overall are poor. Both valve bodies are hard to turn, recommend re-build and re seal ($225). Also recommend re UV paint service $155. Also recommend re connection fittings on booster pump connections $155. Pressure Gauge Body Replacement $55 + $35.