The fencing does not self close or self latch. Recommend repair. The fencing also does not swing away from the pool.

Based upon the tell-tail signs of both the patterned appearance and the rust color staining, it would seem that the pool's steel reinforcements are "bleeding" through the plaster coating. Such situations are indicative of conditions where the original Gunite Shell's thickness was applied too thin (min. 3.00"). As a result and when the plaster erodes over time and moisture can penetrate the Gunite Shell, and thus conditions are introduce that cause the rebar to begin to rust. As the steel rebar rust the pool's structural integrity will eventually fail.

There is medium calcium build up on the tile surface. $450-600 to remove.

The skimmer is damaged and needs its skimmer basket float valve installed.

The main drain is not working at this time because the skimmer float valve ($55) is missing. Also the main drain cover is not VGBA complaint, recommend replacement with a VGBA cover ($88-$300).

The bottom cleaner only needs minor parts. Approx $45 in tune up and $105 in parts.

The pool light is worn and will need to be replaced soon, approx cost $575

The filter is in good working condition. The pressure gauge is not working and needs replacement. Note the elements must be replaced every 5 - 10 years. This may need replacement soon ($350) or a filter cleaning ($65).

The filter pump is in good working condition. This is its second motor. Expect this unit to last another 1 - 8 years without issue.

The booster pump is in good working condition. Expect this unit to last another 2-7 years. Recommend teflon connections are resealed every 10 years. This needs to be done if not already ($105).

This dual timer intermatic timer is in good working condition.

The pressure gauge needs replacement ($35).