Location: Surrounding Swimming Pool
Style: Mesh Netting
Notes: The fence access point is self closing and self latching.

The pool surface is in fair to poor condition. It has approx 2 - 4 years of life left, before the plaster begins to decompose and pits develop throughout in 5 - 7 years.

With proper chemical balance this decomposition can slow.

There are no loose or missing tile at this time.

There is however light algae build up is present in the grout indicating that there is organic growth occurring.

The water quality overall is poor and damaged.

The chlorine is very high and needs to be lowered.

The ph is also very high and needs to be lowered.

The cynuric acid is also very high and needs to be lowered.

The alkalinty is very low and needs to be raised, or raised naturally.

The calcium hardness is slightly high. And can only be lowered via a drain or chemical.

The skimmer is in good working condition at this time.

The main drain is in good working condition at this time, however the covers are not VGBA compliant, I recommend upgrading this for safety ($88ea x 2). .

The bottom cleaner is in good working condition.

This is a Hayward Suction Side Bottom Cleaner

The auto fill is in good working condition.

The pool light is in fair working condition.

The fiber tower needs to be heavily cleaned before the light overheats itself during use. Otherwise this is a good working unit.

The filter is in fair physical condition, however with lowered cartridge pressure it appears that the filters are in like new condition.

Note the O-rings on the filter need to be lubricated every 5-10 years, I feel this needs to be done soon ($55).

This Hayward Northstar Pump is in fair physical condition but with a poor motor condition. The motor bearings are failing and needs to be replaced. Note prolonged bearing wear will cause premature motor failure. Recommend motor Replacment ($350-450) to repair ($150-250).

This valve and plumbing are in good working condition however there are two maintenance needs;

UV Paint; The protective paint is failing and needs an additional coating of UV protective paint ($255)

Valve O Ring Condition; The o rings inside this valve need to be lubricated and or replaced every 5 - 10 years ($125)