Location: The safety fencing was located on the northwest side of the home.
Style: this is a wooden fence.
Notes: it was in good condition however it did not self close and could not self latch. It needs some minor adjustment to be considered Secure and safe.

The pool surface appears to be in good physical condition with no pitting and or loose plaster. There is discoloration though throughout the pool due to improper water balance over time. There is also salt left on the plaster surface that should be brushed in to the pool water.

Note: Because there is a salt system on this pool The pH in the alkalinity increase more rapidly therefore most homeowners who service their own pool did not stay on top of this chemical adjustment requirement. Because of this negligence the plaster has suffered approximately 10 to 20% less life. If this is corrected and the water is balanced this issue should not continue.

I would recommend a citric acid stain treatment to resolve this staining issue ($250) otherwise a replaster in the deep end would be necessary to resolve the heavy discolorations and stains ($500-1500).

The tile is an overall good physical condition however In between the tile is considerable algae buildup this is caused because of improper water balance. There is also light calcium buildup on the tile surface this can be removed via glass bead blasting.

Overall the water quality is in damaged condition with a high Cynuric acid level and a high alkalinity level this plaster surface and tile grout surface are being attacked and will degrade if left unattended.

Recommend lowering Cynuric via chemical ($40 x 3).

Recommend lowering alkalinity via chemical ($25)

Recommend lowering enzymes ($55)

The skimmer is in damaged condition, the skimmer bottom o ring is not set and sealed in place. Recommend repair ($150) of this o ring to have a working skimmer float valve when installed.

This fill float is outdated and needs to be replaced ($34) it currently leaks and does not shut off properly. Currently the auto fill is off because of this issue.

The pool light is not working at this time. The GFCI breaker plug is also not working at this time, I feel both need replacement to resolve this issue ($525 + 150).

This is a like new Jandy CL460 Cartridge Filter

The filter is in great physical condition its o rings are all secure. And the pressure gauge is working.

This Jandy Stealth shp 1.0 hp pump is in great working condition.

The booster pump is older and showing signs of heavy wear. This unit does sound like new however due to the outside aging I would expect another 1 - 4 years of use without issue.

This intermatic, digital, 220v timer is in good working condition. The first switch is a low speed, the second is the high speed, the third is high speed with the bottom cleaner booster pump.

It is all in good working condition.

It also appears that the light switch / side panel breaker are not in working condition at this time recommend light technician to diagnose which if the breakers are bad or if the pool light is bad. I feel it is the pool light, which also caused the GFCI plug to fail.

This Jandy Aqua Pure APURE1400 power unit is not powering the salt cell at this time.

This is most likely caused by a bad salt cell, as the cell appears to be 3-7 years old, and has most likely failed and will need replacement ($400-600).