Location: North West side of home was tested.
Style: Rod Iron
Notes: The fencing was in good condition. However this access gate does self close but does not self latch at this time.

Approx Gallonage: 22K-25K
Dimensions: 14 x 25
Notes: The plaster is in poor & damaged condition.

Overall the swimming pool plaster is in poor condition.

Overall there is damaged areas that need to be re-built from the rebar up.

Total cost to re-plaster pool; approx cost; $3500 - 4200

Total cost to repair plaster patched areas ; +$1500 - 2000

Size of Tile: Custom 4 x 4
Type of Tile: Ceramic
Notes: The pool tile is in good to great condition. There is no calcium build up present and there is no loose or missing tile.

Recommend a light brushing with a pumace or half wire brush to remove the light calcium build up on the tile currently.

No water quality issues at this time.

Skimmer Notes: The skimmer is in good working condition. The float valve is missing however from this skimmer.

Main Drain Notes: The main drain is not VGBA complaint, recommend replacement of VGBA complaint cover ($88).

Manufacturer: Pantair
Model: Kreepy Krawler
Notes: The bottom cleaner is in good working condition.

Pool Auto-Fill: (Yes)
Spa Auto-Fill: N/A
Style: (Manual Turn Style)
Notes: The auto fill valve is located against the west fence, it leaks when turned on. Recommend valve body repair or replacement to ensure this can be used over the summer without water waste ($105-$210).

Manufacturer: Fiberdine / Fiberstar
Model: Fiber Optic
Watts: 750
Notes: This pool light uses a light tower to power a light bulb to shine through the fiber optic cable to the swimming pool. Benefits include a servicable light unit outside of the swimmig pool.

This tower will need to be repaired ($250-750) or replaced ($750+).

Recommend replacement.

Manufacturer:
Model:
Watts:
Notes:

Manufacturer: Hayward
Model: Super Star Clear
SQFT: 300
Notes: This cartridge filter is in fair to good condition. The filter tank o ring needs to be removed, cleaned, and re-sealed with non hardnening silicone ($125).

Also the filter elements need replacement every 18-24 months, I feel these elements may need replacement soon ($200-350).

Manufacturer: Hayward
Model: DS
HP: 1.0 hp 1.5 sf
Notes: This filter pump body is in good condition, however the motor is from an older pump. The motor will fail in the next 1-24 months. Expect replacement cost of motor / cost for entire new energy efficient pump installed ($555 / $1325).

Manufacturer:
Model:
HP:
Notes:

Overall the timer appears to be in working condition, however due to improper mounting and placement the timer could not be examined further.

Also this equipment panel is wired incorectly for safety.

The first issue is the labeled pool light gfi breaker does not power the light instead it powers the fitler pump.

The second issue is there is a GFCI plug on the bottom that does not appear to be able to be reset, however it does trip. This is a cause for concern.

Overall this panel should be mounted correctly as well as rewired for safety ($250) + parts ($100-200).

The auxillary salt system does power on and function, however it appears that there is a bad flow sensor located inside the plumbing, this can be easily replaced for $60 part + $125 installation. This should resolve any issue with the salt system, if it does not, then the next issue may be the salt cell; $300-550 depending on output options.

The valves on this equipment pad are all in fair to good condition.

There are two check valves; One is a serviceable and One is not. Both are no longer in working condition and should be replaced; $255.

There are three other jandy valves, all were tested and showed no signs of leaks or degradation.

The piping pad is in good overall condition, however it should be painted again in the near future with UV paint; $55-110.