Location: Around swimming pool.
Sytle: Rot Iron
Notes. The fence overall is in good condition. However the access point has an issue with self closing. The self closing mechanism is only closing when open past 50%. Therefore it does not close at 0-50% open. This is a safety hazard. Recommend repairing this access point.

Approx Gallonage: 22-26k Gallons
Dimensions: 12 x 32
Notes: The swimming pool plaster is in fair to good condition. There are signs of wear throughout the plaster surface. There are also rust stains in the deep end, you can respolve this stain issue with a treatment service ($225) I would give this plaster a 7 out of 10 and expect this plaster surface to last another 7 - 20 years with proper water balance.

Size of Tile: 4 x 4
Type of Tile: Ceramic
Notes. The tile is in good condition. There are no loose or missing tiles. There is a very light calcium build up and waterfall calcium build up, that may be removed using a pumice stone. Or you may use a Glass Bead Blasting Service ($400) to remove existing calcium deposits.

Overall the water chemistry is in fair condition. There needs to be additional chlorine added to this pool before more algae becomes
present. Recommend a water balance service $125, and since the equipment is leaking all the salt water from the pool I expect this pool to need $100-200 in salt needed as well.

Skimmer Notes: Skimmer Float valve is missing its o ring recommend replace or fix. ($55).

Main Drain Notes: Two main drain covers are not VGBA compliant, I recommend brining these to a current safe standard ($88 x 2).

Manufacturer: Pentair
Model: Legend
Notes: This bottom cleaner is in fair to good condition, it currently needs some mild repair ($45) and the following replacement items; replacement hose from wall to cleaner (including backup valve) ($289) , new tires ($45) , new tail sponge ($15) , and internal gearing components ($55-110). A new cleaner is $626.

Pool Auto-Fill: (Yes)
Spa Auto-Fill: (N/A)
Style: (Valve w/Float) + (Manual Turn Style)
Notes: The autofill is in good working condition. The shut off valve is located on the side of the home. And currently works properly.

Manufacturer: Pentair
Model: Intellibrite
Watts: 300-500
Notes: There are two color lights installed. Both are in good working condition at this time.

Manufacturer:
Model:
Watts:
Notes:

Manufacturer: Pentair
Model. Clean and Clear Plus
SQFT. 525
Notes: The filter pressure air bleed regulator is no longer working, and leaking, as well as a bad pressure gauge. Replacement is $175.81 for whole assembly.

Additionally the filter need cleaning at this time ($65). I also feel the elements may need replacement in the next 1-12 months ($575).

Manufacturer: Pentair
Model: IntelliSpeed
HP. 3 HP
Notes. This filter pump is in good working condition overall, however there appears to be a leaking shaft seal ($325) that needs to be serviced and repaired.

Manufacturer: Polaris
Model. Pb4
HP: 3/4
Notes: This unit is in good working condition overall, however the hose couplers are both leaking. This needs to be repaired to ensure proper operation ($210).

This Pentair Intelli system is in good working condition. It appears it has 4 function + 2 aux. This unit shows all temperatures working at this time. It is pre-wired for wireless control. And has no errors at this time.

This intellichlor system is in working condition, however the salt levels are low due to an equipment leak. Once salt levels are restored and the leak maintained the system will be in working condition.

All valves are in good working condition except for one actuator, that controls the waterfall and deck jets. There is currently no power to this unit and it most likely needs replacement ($325). Additionally one valve is leaking at this time. This valve needs the seals to be replaced asap ($175). Once the actuator is replaced this should be able to be controlled via the remote (which is not on site). Replacement remote ($676).