Location: North west side of home
Sytle. Wood
Notes: The fencing is in good condition, however it needs an adjustment to make this self latching , self closing.

Approx Gallonage: 23-28k Gallons
Dimensions: 16 x 32
Notes: The plaster suffers from chemical or calcium scaling throughout. This is causing the plaster to delaminate and wear unevenly. Recommend proper water balance to slow this inevitable issue. This issue will cause the plaster to flake off in the next 1-5 years. Recommend replaster in 1-6 years.

Size of Tile: Custom
Type of Tile. Ceramic
Notes: The time is loose and missing throughout the swimming pool. Cost to repair the loose and broken tile sections $800-1500.

High Chlorine and High Cynuric cause for immediate water balance attention. $255 to adjust and balance chemicals.

Skimmer Notes: Missing skimmer float valve. $55. Flow is minimal in this skimmer opening. Caused by older worn pump motor.

Main Drain Notes: Not compliant. Recommend replacement. $88.

This system is capable of running both a return and suction side bottom cleaners. Unique. A nice feature.

Pool Auto-Fill: (Yes)
Spa Auto-Fill: (No)
Style: (Manual Turn Style)
Notes: In good working condition. Substantial flow when turned on, would raise water level in less than 30 minutes.

Manufacturer: Fiberstar
Model: Fiber Optic
Watts. 200-750
Notes: The light housing has been damaged. This box would most likely need to be replaced ($700-1200) in order for this pool to have light, otherwise a repair between 300-600 may solve the issue.

Manufacturer:
Model:
Watts:
Notes:

Manufacturer: Hawyard
Model: Super Star Clear
SQFT: 300
Notes: The filter is in fair to good condition. No water leaks present, however there is medium air leak most likely on the filter tank o ring ($55). Recommend o ring lubrication service to alleviate this issue ($105) or replacement.

Manufacturer: Hayward
Model: Superstar
HP. 1hp 18AMPS!!!
Notes: This motor is a high amp draw motor, I would recommend replacement with a high flow low energy pump. This pump is currently leaking out the return fitting ($150) also the motor is corroded and hot showing that it has 5-20% life left. Cost to replace $575-1325.

Manufacturer:
Model:
HP:
Notes:

Intermatic
Single Throw Timer
In fair condition.

The valves installed are all currently in good working condition. However due to the age of about I recommend that all Overington side of each down she removed lubricated and or replaced. Approximate cost for service $255.

I would also recommend repainting the equipment pad to protect it from uv damage. $255.