Location: Around the swimming pool / access to the pool.
Sytle: Metal Rot Iron
Notes: The swimming pool fencing is in ideal physical condition. However there needs to be some maintenance to the self closing spring. At this time the fence does not self close or self latch. It needs additional hardware to be installed to self close.

Approx Gallonage: 22-25k gallons
Dimensions: 14 x 28
Notes. The pool plaster is poor condition. There is pitting and discoloration throughout. I would recommend a re plaster service in the next 1-24 months. It's even down to the gunite on the deep ends seating walls' radius.

Size of Tile: 4 x 4
Type of Tile. Ceramic
Notes. The tile is in good condition. It has light calcium build up in between tiles and on the tile surface. This can be removed by using a light scrub and brushing.

The water quality overall is fair. It currently has a chlorine reading that is very high. Please remove the chlorine tablets out of the skimmer basket immediately. It also currently has a low cyanuric acid level please raise this soon. And last there is algae in the pool even with a high chlorine reading. This means that you have a bad algae infestation. I would recommend a phosphate treatment service to remove the algaes food source and eliminate it from the pool.

Skimmer Notes: The skimmer is filled with 3" tablets. And the skimmer float valve has been removed to do a vacuum service, still in progress. Skimmer circulation is good at 100% skimmer 0% main drain with this 1hp challenger pump.

Main Drain Notes: Missing single main drain cover recommend replacement $88.

Manufacturer:
Model:
Notes:

No auto fill valve present. However I did locate an autofill line into the pool.

Manufacturer: American Standard
Model. Incandescent
Watts: 500
Notes. The light is in good working condition.

Manufacturer:
Model:
Watts:
Notes:

Manufacturer: Pacfab
Model: Mitilus
SQFT: 100-150
Notes: This filter is in fair condition. It manages to keep the water clear of heavy debris, however there is a small algae infestation and I would recommend replacing the filter element to remove this algae issue ($150).

Also the pressure gauge ($35) and filter tank o ring needs replacement ($55).

Manufacturer: PAC Fab
Model. Challenger
HP. 1.0 new motor , old body.
Notes: In fair working condition, motor and capacitor very hot. Will need service soon $100-200 or replacement ($300-555).

Filter pump is also not properly grounded. Recommend grounding ($155).

Manufacturer:
Model:
HP:
Notes:

International single throw yellow dial 220v / 120v timer. In great working / new condition inside an original timer box in poor condition. Exposed wires and contacts requires this timer to get some needed attention or replacement ($355).

There are no valves installed. However there is heavy sun fading / damage to the piping. Recommend paint service to restore the piping to like new uv protection ($175).

Also there is a leaking o ring on the filter tank. This is the only source of water on the equipment pad.

I would expect there to be a need of an o ring replacement on all pieces of equipment here I would expect this standard maintenance service to cost $200-400.