Location: Access through West Side of Home. Also around pool.
Sytle: Wood / Metal Rot Iron
Notes: The gate coming into the property from the front of the house is dragging and does not open and close freely. It also has a lock on the gate. The gate surrounding the swimming pool is in good working condition. It does self close and self latch.

Approx Gallonage: 18-25k Gallons
Dimensions: 12 x 25
Notes: The surface of the pool is in good overall condition. There are rust stains throughout the swimming pool, that can be removed by an acid stain service ($155). Also note there is an imperfection in the deep end of the swimming pool. This imperfection may have been caused by direct contact with an acid.

Size of Tile: Custom
Type of Tile: Ceramic
Notes: The tile is in good condition. No loose or missing tile. There is a mild amount calcium build up, however it is fresh so it can easily be removed with a wire brush and solution or a pumice stone. Recommend removal in the next 1-3 months to avoid permanent adhesion.

Overall the water quality is in good condition. However the pool needs to be de-chlorinated soon to avoid additional issues. This also poses a health risk for anyone who enters the body of water. Note the cause of the yellowing plastic covers throughout the pool is from over chlorinating damage. This is directly caused by the 3" tabs in the skimmer basket as well as over-chlorinating the body of water for prolonged periods of time. Recommend replacement of the covers throughout the pool in the next 1-3 years ($200-500).

Skimmer Notes: The skimmer is in good working. Could not check the skimmer float valve functionality due to too high of chlorine. Recommend replacement float as it is most likely damaged due to too high of chlorine. Also there is 3 3"tablets in the skimmer that are causing damage to all plastics inside this pool. Remove these tablets to ensure proper chemistry.

Main Drain Notes: The main drain is in working condition. It has an anti entrapment cover, however it is not a VGBA compliant cover. Recommend replacement with an approved cover. Also note some modification may need to be made as the angle of the bottom would cause issue with a new flat compliant cover.

Also note that the spacing between both main drains are 2 feet. This is an approved distance to provide anti entrapment. Therefore VGBA compliant covers are recommended.

Manufacturer: Polaris
Model: Robot Cleaner
Notes: The bottom cleaner is in great working condition. This unit is on a 2:30 hour timer. This unit is a plug in model and is in like new condition.

Pool Auto-Fill: (Yes)
Spa Auto-Fill: (No)
Style: (Manual Turn Style)
Notes: The auto fill manual valve is located near the pool equipment. It is in good working condition. Turn the black nob to turn the unit on and manually fill this body of water.

Manufacturer: Fiber Star
Model: 2004 AS (Not Exact)
Watts: 250-650 W
Notes: This fiber tower does not receive power at this time. This may be caused by a faulty breaker or a bad power supply. I feel it is caused by a bad breaker. The cost to repair will be between $175-350.

Manufacturer: Jandy
Model: CL-460
SQFT: 460 SQFT
Notes: This filter is in good working condition with no leaks present. There is one damaged part; the pressure gauge assembly the cost to replace is approx $78. Other than that the filter is in good working condition. The filter may need to be cleaned once the chlorine is brought back down to a reasonable level to ensure proper balance.

Manufacturer: Pentair
Model: Intelliflo
HP: 3hp
Notes: The filter pump is in good working condition. There are no leaks present and the filter pump basket fills completely.

Manufacturer: Pentair
Model: Sun Touch
Notes: This unit is in good working condition. This unit operated the pool light (if operational), the pool filter pump, the solar, as well as the salt cell (if operational). This unit detects the temperature of the water, the air, as well as the solar.

Manufacturer: Jandy
Model: Aqua Pure
Notes: The unit is currently not working. This unit is between 5-10 years old. Due to the age I would recommend replacement of this unit to utilize the salt operation ($1250).

Manufacturer: Pentair & Jandy
Model: 2 way, 3 way, and Check Valves all installed
Notes: Items are all in good working condition. No leaks present.