Location: North West
Style: Wood
Notes: The gate self closes and almost self latches, however the tension spring needs to be tightened. Recommend repair.

Approx Gallonage: 25k Gallons
Dimensions: 13 x 30
Notes: The pool plaster is in fair to poor condition. There is heavy plaster wear around the main drain cover, and steps. All the way down to the gunite. I feel this pool can potentially last another 1-4 years, however I would recommend a re plaster or re surface in the next 6 months.

Also there is rebar stains coming through to the plaster surface. This, if left unattended can spread through the metal structure. Recommend repairing this section ($450) if not,
re plaster soon which will correct this issue.

Size of Tile: 2 x 2
Type of Tile:

The water quality is in fair to good condition. I would recommend adding chlorine and cynuric acid.

Skimmer Notes:

Main Drain Notes:

Manufacturer: Polaris
Model. 280/380
Notes. The bottom cleaner is in fair condition. The hose however is in poor condition, recommended repair or replacement of hose in the next 6-12 months ($210) also needs a new wall mount (included in price) as the current one is not functioning correctly.

Pool Auto-Fill: (Yes)
Spa Auto-Fill: (No)
Style: (Valve w/Float)
Notes: Auto-Fill is in good working condition.

Manufacturer: American Standard
Model: Incandescent
Watts. 500watts
Notes: The pool light is not turning on, due to the gfi plug tripping. It is tripping because of a bad gfi plug ($50), a shared plug located by the fence / north west corner of the pool that is partially buried and most likely it's moisture is tripping the plug ($55) or the pool light needs replaced ($475).

Manufacturer:
Model:
Watts:
Notes:

Manufacturer: Sta-Rite
Model. System 3
SQFT. 300sqft.
Notes: The filter pressure is very high. Recommend cleaning and re testing. Currently this 3/4hp pump is running the filter to 20psi or 94%. Recommend cleaning filter ASAP.

Manufacturer: Sta Rite
Model: Dyna / Max e Glas
HP: 3/4
Notes: The filter pump is in fair condition. It has a single leak on the pump lid, this o ring needs to be replaced. It is also a higher temperature than normal, about double. I feel it is because of dirty filter elements ($55 cleaning, or $525 replacement).

Manufacturer: Polaris
Model. PB4
HP: 3/4 HP
Notes: The booster pump is in good to fair working condition. It currently has no issue producing water flow to the bottom cleaner. I would expect another 1-4 years from this pump motor.

Heater ready with stub up for gas.

Manufacturer: Intermatic
Model: T-104 Dual 220v Timer
Notes: In good working condition. One functions the filter pump and one functions the booster pump.

Manufacturer:
Model:
Notes: This unit is not receiving power at this time. Therefore I feel replacement is required ($250-350).

Manufacturer: GoldLine
Model: Aqua Rite
Notes: The salt system does power on and detect flow / salt / and the salt cell. However the system is not producing chlorine. And that is because the system either recognized a low salt level (below 2500ppm) or the salt cell is not working and in need of replacement ($400).

Manufacturer: 2 x Jandy 1 x Pentair
Quantity: 3
Size: 2 x 1/12
Notes: The valves are currently in good working condition.