Location: East Side of Home
Sytle. Wood + Mesh Around Pool
Notes. The wood fence on the east side of home is self closing but not self latching. Needs repair. The mesh fence around the pool is self latching and self closing.

Approx Gallonage: 20k Gallons
Dimensions: 10 x 22
Notes: The pool plaster is in fair to good condition. However there are several rust stains in the swimming pool. They appear to be coming from underneath the surface, and not surface stains.

Size of Tile: 4 x 4
Type of Tile: Ceramic
Notes. The tile is in good condition. Calcium buildup throughout. To remove it costs $450.

The water quality overall is in good condition. The salt level is currently at 2900 ppm. The Cynuric is low at 10-30 ppm. All other levels are in ideal range. That said this pool is 7-12 years old. And every 5-10 years a pool should be drained as the TDS gets higher. Drains cost $250-450 depending on level of service.

Skimmer Notes: The skimmer is in good working condition.

Main Drain Notes: The main drain does not appear to be working. This is caused by a spring valve in the skimmer. I feel this should be removed and open to allow proper flow using the installed float valve.

Manufacturer: Jandy
Model. Ray Vac
Notes. The ray vac is in good working condition.

Pool Auto-Fill: (Yes)
Spa Auto-Fill: (NA)
Style:(Manual Turn Style)
Notes: The auto fill is in good working condition.

Manufacturer: Jandy
Model. Sam / Sal
Watts. 30-160 watts
Notes: Color changing light in good working condition.

Manufacturer:
Model:
Watts:
Notes:

Manufacturer: Jandy
Model: Cartridge CL 460
SQFT: 460sqft.
Notes: the filter band is leaking. Recommend tank seal Replacment $105 to resolve this issue.

Manufacturer: Jandy
Model: Stealth
HP: 2.70
Notes: The pump and motor are in good working condition. The motor is a replacement motor and not original. The motor is in fair shape. It does sound as if it is struggling (10-20% sound issue). I would expect this motor to work for another 1 - 2 years before replacement is needed.

Manufacturer:
Model:
HP:
Notes:

There is a waterfall valve located near the skimmer. This controls the waterfall and not a separate pump.

Jandy board and controller are in good working condition. The wireless controller is in good working condition.

There is an integrated Jandy Aqua Pure salt system installed. The cell appears to be producing chlorine. The salt level is 2900ppm. There is no issues with the salt cell, and it is in good working condition.

There are three Jandy 3 way valves installed. Two on the equipment pad and one by the skimmer for the waterfall. The one on the equipment pad is leaking and need it's seals replaced $155. The piping also needs to be painted $205 to protect against uv damage.