Location: South Side
Sytle: Wood
Notes: The fence is In fair condition. Needs repair to self close or self latch. $150 repair cost.

Approx Gallonage: 18k
Dimensions: 10 x 25
Notes: The plaster is in poor to fair condition. There are signs of re bar rust bleeding through to the plaster surface. If not corrected this will compromise the entire pool shell. Also signs of heavy wear on the plaster surface. I expect another 2-6 years from this plaster surface before replacement would be needed.

The concrete overlay coping is delaminating in many locations. Specifically one area in the north east side of the pool. The other in the south west side. Both areas feel hollow and show visible signs of cracking and corrections / patches.

The coping around the skimmer is warped to an oval shape. If it continues any further it will crack the inner plastic ring.

I feel if it continues anymore the skimmer opening will eventually fail. And the skimmer basket will not be able to be cleaned out without modification. As it sits now the skimmer lid does not fit correctly. And one side is popped out of the skimmer opening causing a tripping hazard.

The plaster surface also has a thin organic algae buildup from a previous drain and clean service. This thin layer is on everything from the pool light to the pool surface. This should be removed to keep chemical usage down to a normal level before replastering.

Also with the current filter this may have difficulty being removed, as it is fine and abundant for this 150 Sqft cartridge filter.

I also found that the soft patched areas of the concrete coping / water line also aligns with either plaster variations or concrete lifting (pictured).

Size of Tile: NA
Type of Tile: NA
Notes: The tile zone is covered with a concrete pebble and painted. The paint is durable for up to 5 years. This eliminated the need for tile at this time.

The water needs adjustment and balance ($175) immediately. Otherwise this pool will turn green in 1-5 days.

Skimmer Notes: In poor condition. Float valve needs cleaning and or replacement. Currently damaged.
Main Drain Notes: The main drain appears to be new and VGBA compliant.

Manufacturer: NA
Model:
Notes:

Pool Auto-Fill: (Yes)
Spa Auto-Fill: (No)
Style: (Manual Turn Style)
Notes: The auto fill is not working at this time due to a faulty wall valve. Once turned nothing happens. Cheap plastic valve $80 replacement.

Manufacturer: American Standard
Model: Incandescent
Watts: 500
Notes: In good working condition. Original light nitch. New light bulb. Wouldn't expect this to last longer than 1-6 years. Once light
Nitch seal is broken leaks are immanent. $475 Light Can Replacement.

Manufacturer:
Model:
Watts:
Notes:

Manufacturer: Sta Rite
Model: Cartridge
SQFT: 150
Notes: The filter pressure gauge needs to be replaced. The filter elements need to be cleaned however they are in good overall condition. The tank o ring needs to be lubricated and cleaned ($55).

Manufacturer: Sta Rite
Model. Dyna Glas / Max e Glas
HP: 1
Notes: The filter pump is leaking from its return fitting. Also the pump lid seal needs replacement. However this pump is completly underated to run the solar that is installed (needs 2 hp or more) instead Recommend replacement with variable speed pump. Also note The three way valve above the pump is currently putty sealed therefore it will leak in 1-6 months, Recommend replacement ($150).

Intermatic Single Throw 220v Timer Clock. In working condition. However overall fair to poor condition.

There are three switches on this equipment pad. They all work. One operates the pool light. One operates the timer clock. And the last is a gfi plug. This does work and resets as needed. All are in poor to fair condition. The self closing lids do not self close. Recommend rapir or replacement on all of these covers and protectors ($150).

Working condition. Currently controls the Intermatic 3 Way Valve, which is in fair working condition.

Manufacturer: Intermatic 3 Way Valves
Model: Never Lube and Lube Versions.
Notes: Both appear to be original valves. All need to be maintained by either cleaning and lubricating o rings ($255). And the never lube valves x 2 need to be replaced ($155x 2).

There are four 3 way valves and two ball valves. All are original.