Location: North
Sytle: Rot Iron
Notes: The two access points are self closing self latching however there is a large entrance located to the west of the pool with access to the street. Other than this open access point it appears this pool is self closing self latching.

Approx Gallonage: 28k
Dimensions. 18 x 30
Notes: The swimming pool plaster is in fair condition. It has "dry" cracks throughout the swimming pool. This more than likely happened as a result of sitting dry for longer than 1 week. I would expect this plaster, if maintained correctly with ph balance, to last another 5-10 years without any issue.

Size of Tile: Custom
Type of Tile: Ceramic Multi Piece
Notes: The swimming pool tile is in good condition with little to no calcium build up. Also the coping around the pool is in good condition with a light cracking issue on the brick and concrete border. This can be fixed easily with grout addition / recondition.

Ph: 7.8
Free Chlor: 1
Total Chlor: .5
Cal Hardness: 1000

The water is in poor condition. I feel it has been left without chemical for a long period of time. This can be corrected with a green treatment service ($125).

Notes: The skimmer and main drains are in good condition. However the skimmer is missing the float valve. This device ensures proper circulation to the main drain while in use.

Manufacturer: Polaris
Model: 280 / 380
Notes: The bottom cleaner may need the following;

1. New wall adaptor
2. Backup valve
3. Hose Swivels

Approx cost ($189).

Pool Auto-Fill: (Yes)
Spa Auto-Fill: (No)
Style: (Manual Turn Style)
Notes: The auto fill line has missing valve top. This can be fixed for less than $45 to bring this pool auto fill back to working condition.

Manufacturer: American Standard
Model. Incandescent
Size: 500w
Notes: The pool light does not appear to be in working condition. There does not appear to be water inside the light. Most likely only needs a bulb replacement service ($155).

Manufacturer: American Standard
Model: Incandescent
Size. 300w
Notes: In good working condition.

Manufacturer: Hayward / Blue Haven
Model: c4000
Size: 450 Sqft.
Notes: The filter is in fair condition. The pressure while running is above 30psi. This indicated dirty or filters x 4 need to be replaced.

Manufacturer: Jandy
Model. Stealth 2008+
Size: 1.5hp
Notes: The filter pump is in good working condition. I expect this to last another 3-15 years.

Manufacturer: Polaris
Model: PB4
Size: 3/4hp
Notes: The booster pump is in poor to fair condition. I would recommend replacing this item sooner than later. It currently does still work however it appears to have bad bearing(s).

Manufacturer: Anzen
Model: 2" Blower
Notes: This pump is activated by the switch underneath it. This device provides additional air, bubble, and jet action to the spa. It is in good working condition.

Manufacturer:
Model:
Size:
Notes:

Manufacturer:
Model:
Size:
Notes:

Teledyne - 200k-400k btu. Circa 1980-85. This heater is not currently working. I would recommend replacement as the cost to fix this heater would be greater than the valve of a new unit ($1500-2800).

Intermatic Dual 220v Timer - In good working condition. Functions both the filter pump and the bottom cleaner pump.

Jandy 2" 3 Way Valve is in good working condition. The Ortega 3 way valve needs to be replaced ($255), this valve is over 20 years old and most likely is not functioning correctly internally.