Open gate access.

The surface is approximately 25 years old and overall in good condition for its age, with normal wear seen. I do see some wear on the top step and some blemishes in the shallow end, but overall fairly nominal for the age of the pool. The pool top step wear could easily be filled in with minor epoxy to help prolong the remaining life of the plaster surface = that small blemish repair would likely be less than $100. The blemishes or stains seen in the shallow end are likely surface only from overhead oak and acorns that drop in the pool and will likely resolve over time. Recommend minor stain treatments to remove/confirm issue ($200 or less) if desiring immediate results.

Normal wear seen on waterline tile and rock work. Very minor calcium buildup scene mostly on waterline Tile.

There is a small gap, forming on the top jump rock and should be addressed as it is currently loose, which may be as simple as just removing the rock and filling in with some concrete less than $500 is likely.

Recommend adjusting CYA as it is low and CAL hardness is also slightly low, recommend chemistry additions ($100+).

The skimmers both have all parts present.

The main drains / covers are all present.

The bottom cleaner is working very well. The bag is nearly full and it’s likely waited over and has fallen over when the cycle has turned off, but when it does turn on, it does function well, still I’d recommend minor updates likely to the rear float if needed and or tires - less than $85

Working. Cannot access canister.

Overflow line appears present.

One light turns on (south light) one does not.

A new light can is approx $250-1250+ install $400

This filter is operational. Water is clean and clear. Pressure is getting higher, indicating quarterly filter cleaning and tank o ring service is nearing soon ($85+).

Working Condition. No leaks present. Pump lid o ring / basket / lid - is due to be updated soon (due every 10 years) $200 or less.

This pump is functional. It appears to have a small return leak on its return connection, this is likely a small item repair to re tape the thread / new fitting ($205 or less) otherwise seems to be without other issues at this time.

This pump functions , no air in lid while running, just at start up we see some water spray and during operation - this may be resolved with service ($200+) or removing this pump and using a valve instead with the more efficient filter pump ($500+).

Functions. Recommend updating the outlet breaker $50 or less / $50 light gfi + service otherwise without issue.

Older, seems to be functional at this time, I see bubbles during an off period (indicating flow sensor / service ($50+) needed soon).

Recommend covering from the sun using a uv mesh ($50+) otherwise without issue.