Expired surface. Auto fill running. Likely due for re surfacing asap to prevent water loss.

Cost to re surface 12-15k+

There is waterline tile on approximately 90% of The Pool and Spa, and some rock work in the Spa area and far pool wall.

That Rock and Waterfall mortar is older and likely due for update soon ($2-3k+)

The water line spa spillover tile is due for attn soon / missing tiles ($1-2k+).

Some calcium build up present ( $555 or less)

There are two main drains in the pool and one in the Spa, recommend updating all three for safety now ($200 x 3) but no, they will not be VGBA complaint.

At next re plaster expect a cost of $1k each x 3 for channel drains = which would likely be minimum required.

The skimmer is due for an updated, float, float o ring, weir door, and lid ($300 or less).

This unit is working it is slightly older, but it does have some updated parts. I would recommend updating the tires tail, and some of the hose swivels are leaking as as well as the wall adapter ($205+)

The manual fill is functional, the automatic filler that is connected to the hose appears to be functional, it is low-cost low quality, and is running continuously - recommend minor attention to confirm if the float is operational and correct ($20).

Light is not working / powering on at this time and may need replacement ($750+)

Light is not working / powering on at this time and may need replacement ($750+)

Filter is leaking out of its tank O-ring, it appears to potentially be leaking out of the top of the filter itself as well, and if so a new top is $500+ , the Tengo ring needing service is relatively simple ($150 or less) virtual also clean the filter elements and confirm if the elements are due to be updated ($500+).

Miss Pump is functional and working. Recommend attaching the bonding wire and updating the pump lid o ring and basket - $200 or less

Due to be updated due to age and condition ($300-1500+) leaking at shaft seal - recommend attn to resolve this issue via repair or replacement

The waterfall pump does turn on and function, the bonding wire is not connected ($100) recommend attention to the pump lid, O-ring and basket ($200).

Note the return is leaking and due for attn ($300) / possibly new wet end ($750+)

The timers and board have been updated, but the breakers are Older recommend updating the breakers to GFCI on all of them ($300+) + electrician ($450)

Equipment pad is in sun exposure for the middle to afternoon part of the day - recommend repainting and re-labeling the equipment pad ($300 or less).