Poor clarity, less than 50%, Older surface , Blemsihes seen throughout, calcium fishers present throughout in abundance, re bar repair done (dolphin mosaic) seems to be ideal

Older surface may be nearing expiration soon = cost to re surface this size pool $10-14k

At that time consider a better water tight option for approx 50 linear feet of rock work - to upstate these areas to a more ideal standard = $5-10k+ depending on options. Current setup is a low cost way / less than ideal for water right = rock at water line.

The Pool is exposed on it south side, helping to look for any signs of water loss, some is seen on the south middle end / rust present - recommend attn

The rock work on the spa spill over is also due for attn

Water line rock and water fall rock all are due for attn soon

All to help prevent water loss

$1-4k+

Low Chlor / High ph / alk

low cya / medium level cal hardness.

Recommend modification to chemistry $100-200 or less

And water treatments for clarity / dissolved organics ($175-350) note black algae present

Water level too high to check skimmer throats.

Recommend updating the float , float o ring , - otherwise ideal x 2 - $300 or less

Main drain pool x 4

Main drain spa x 2

All covers due to be updated for age - $200 x 6 installed.

Note drains are not VGBA complaint in spa. But pool may be a recommend checking to confirm underwater / at time of service

Vs Amazon each cover $50 or less

Recommend minor updates soon / center drive ? / rusted screws on machine / tail non high functional , low function.

No float present. Recommend adding a float and re checking functionality of fill line

Both pool lights have expired and are due for updates, a new light can is $200-$1250 , plus labor to install $400 x 2

Seemingly older light with condensation present inside the light can, 6 inch light, $200-1150 new can + labor $400

Seap-Leaking - at tank o ring ($200 or less ?)

Pressure gauge is newer.

Elements likely due for updates ($400+) unless replaced in the past 12-24 months.

Note I likely wouldn’t recommend putting too much more money into this old filter vs replacement. Outside of standard outlined service / vs sand filter.

Like new. Without issue. Lid o ring lube needed ($10)

Working. Due for hose update soon ($200 or less) or more ideally hard plumbing instead ($500 or less). Hose return connection point leaking.

Working. Minor lid o ring leak , and also likely due for lid o ring / basket update - service $100 or less

Working. Without major issue. Original but likely little used, so ideal.

Lid o ring and likely basket due for minor service ($100 or less).

Display lights up but no check valve after heater to chlorinator, therefore metal exchange is likely of issue as well as other issues likely present.

Updated heater gas is approx 4-5k + install $1k

Working panel.

Breakers due to be updated to GFCI variable at least ($200) + light / other equipment GFCI breakers $200 and electrician labor $400+

Due to salt / likely high chlorine - I am seeing signs of water loss via seal issues / lack of service - recommend full seal service to all o rings present to bring back up to like new condition (due every 10 years + - overdue)

Service to all o rings and Valving (16 valves - at least two are newer - $1k or less for o ring service $1500+ or less for all new internals

Recommend covering from the sun using a UV mesh ($50)

And re painting and re labeling soon ($200 or less).