Ideal surface for its age. Some small abnormalities noticed, nothing seems substantial at this time.

1st are these little specs of discoloration what I initially assumed was metals that have dropped on the surface in caused corrosion - pictured

2nd on the bottom of the deep end seen mostly from the south all the way to the north on the bottom mostly we have small rust colored but likely surface level stains, in multiple locations, recommend minor testing to confirm if of issue (which I feel is more water chemistry related vs surface / issue) $100

The tile overall appears to be pretty darn good condition. There is just some areas that will eventually need some attention in the next 1 to 10 years with new moring that may be around the Auto drain area and at the skimmer throat connection less than $200 in parts and labor.

No obvious water loss present seen, with ideal cya and cal hardness

Otherwise the levels are out of balance - higher ph and higher alkalinity

Recommend minor modification ($20 or less) in chemistry

But there appears to be algae present, at least in the skimmer throat, which is not too uncommon, but should be addressed. I also do see some minor spots of algae around the pool light themselves, and very light algae in the shaded portion of the pool walls = recommend algae treatments to remove less than $100-$200

All parts are present in the skimmer, approx 9 years old due for minor optional updates = $100 or less = float , float o ring , weighted basket , and new lid

The main drain covers are likely 7 years or older if so = due for updates $50 x 2

Without major issue. Could use minor adjustments, maybe new hose swivels, annd tires soon - otherwise fine.

The auto fill canister itself could not be checked, but appears to be functioning at this time = note that it was running during the duration of the inspection, even with the solar and pump off, this could just be evaporation, but it is still note worthy. Recommend minor service ($20)

All 3 working. From 2022. Expected max life is over 5-7 years.

Low voltage lights.

Working. Ideal overall. No leaks. Just pressure with solar and bc at 14 psi … and reported recently cleaned on a clean pool = may mean elements are due for replacement soon ($200-400+ service of $150+)

Recommend service ($150 or less) to confirm status of elements.

Working without issue.

I do not see any GFCI variable speed pump breakers present -recommend updating optionally for safety = $200-$400+

Recommend re painting and re labeling the pad $100 or less.