The surface is likely over 30 yrs old and has Wear common with surfaces over 20 -30 yrs old. Blemishes present seen (middle wall / mostly middle and deep ends).

All tiles are present, except for two top tiles in the north and one on the west side of the pool, and a blemish on the east side; these effected tiles themselves can be updated now ($300+) or better value / suited at time of next re plaster.

The water chemistry is currently being maintained, I am finding it is in balance; the pH and alkalinity are only slightly high, I did find the calcium hardness and CYA levels to be slightly low.

I do see ever so slight signs of algae in the shaded side of the pool, which is very common this time of year, it will likely resolve itself over time or with minor treatments ($50+).

The main drain is original and present. Not VGBA compliant.

The skimmer is original and working, with all parts present.

The cleaner is older and in distressed condition overall, the cost on a new unit is approx $650+

If desiring to update this cleaner with newer parts = $200+ but due to age and condition, a new unit may be a better buy.

N/a

The Pool light is older and likely due for updating ($150+ install labor $400+).

This filter is in remarkably good condition likely because it has been kept out of the sun, the filter itself could likely use an updated pressure gauge soon a low cost one is $10 or my favorite is the $50 liquid filled. But otherwise this filter is not leaking at this time, and is due for quarterly service which typically is at no additional cost to perform with regular weekly service.

The filter pump is a whisper Flo 2 speed - it does function without any leaks present at this time.

This booster pump is in working condition, there does not appear to be any leaks at this time on this unit.

The subpanel is in working condition. It appears that we do not have any GFCI only GFI standard, which is common. They’re also appears to be terminated wiring below the panel. I assumed that was The Pool light wire initially, but this may just be old wiring present.

All valving is hidden from the sun underneath the shade cover here, there are no leaks present on any equipment or valving.

It does appear that we also have labeling present, as well as as high-quality filing present as well.