Waaay too tight of spring. It is a hazard at adult eye level. This is lifted with small eyelets into cheap wood. In 1-10 years this will be an eye or head injury waiting to happen. Repair now.

Salt conditions are likely wearing the surface faster, as I am noticing blemishes seen and rough / wear seen on surfaces. Recommend ideal chemistry levels including lower chlorine and balancing LSI

The waterfall backside, looks recently updated but moisture inside stucco present but uniform through the entire wall even where the waterfall isn’t anywhere near.

Still running this for 60 minutes did not produce any moisture on the backside.

The skimmer throat tile connection corner has some gaps present - likely of non issue - but should be double checked to confirm ($50)

Also minor repair to corner tile ($200 or less).

Recommend treatments = I see there is black pebbles in the pebble plaster at approx 1% but there, to me, appears to be also black algae build up as well ? + small bugs present.

Recommend removing phosphates and treatments to remove algae food but clarify the water and add some cya ($200+)

Water balance does not lead itself to be thought of as water loss being present , re checking in 1-30 days to confirm.

Note this should be done asap vs later in the season ($200+).

Recommend adding a float , float o ring ($100) and a weighted basket ($50). Otherwise nominal - water level high could not see into skimmer throat.

No bottom cleaner present, but this booster an be removed and re plumbed into suction ($500+) to save energy + a suction side cleaner unit = The Pool Cleaner 4 Wheel + In Line Basket ($500-650)

Recommend minor clean out ($20) otherwise ideal.

Without issue. 3 LED Pentair

The filter is likely recently cleaned but with the likely presence of black algae in the pool recommend treatments + cleanings ($150+)

Return union is leaking , recommend service to resolve ($125+). Otherwise this pump is like new.

Working without issue. To upgrade recommend hard plumbing ($500+) instead of this soft plumbing for longevity.

The panel is powered by a main house breaker that is not GFCI rated, recommend adding this ($200+) or more ideally a sub panel of some kind ($500+) for GFCI to all pieces of equipment which is most ideal.

System in standby - could not fully test. But is a like new unit with a 3 year warranty (or 1 year depending on installer).

Note a cleaner , and better system to consider as a replacement are the

CMP AOP 25 / 40 systems as an all in one top tier product for UV + Ozone.

Ideal overall. Recommend labeling ($50) , and covering from uv using at least a UV mesh ($50).