The surface looks near new less than 5 years old. Even though I could only see 3-4 feet down partially, it did look blemish free overall.

On the back waterline rock work = Most of the rock work is fine but missing in some areas that it should be present to avoid sharp dangerous trip hazards + eventual loose stones due to low amounts of mortar = recommend attention / more mortar ($500+)

Water line tile is ideal except for north right middle. Two tiles due for attention ($500+)

Showing it’s older water + poor water quality WITH chlorine present = to me a drain and light acid wash to bring it back to perfect asap ($500+) vs doing it yourself ($100).

I could not see the main drain of the pool.

There is one wall drain cover.

The two skimmers are older, recommend updating their parts ; weir, float , float o ring , weighted baskets etc ($500+)

Recommend in line leaf basket add on ($100) otherwise working well.

Just an old float sitting in the fill canister with water in it. Guessing they just need a minor repair (float) to get this going again (125+)

Older light can. Due for updates $600 can + install $400

Leaving at seal, gauge is sun beaten, DE. Potential issue with GRID Assembly / De / Service = $450-950+

Recommend considering different filter for ease / best cost overall.

Aqua Star Pipeline 3500
Pentair Ta 100d

Both FAR better options.

Pump lid o ring / possible lid ($150) currently air loss heard at lid - also recommend service to union o Rings($200). Otherwise the pump is working, high energy.

The timer internals is new but the box is older and not fully waterproof / missing door seal. Overall working but in poor shape overall. Still recommend connecting the lower conduit nut and adding a simple rubber seal ($50 or less).

The breakers are in poor condition. Recommend updating breakers to variable speed GCCI for future proofing and replacing the breaker currenlty for safety ($300 parts + electrician labor ($350).

Recommend attention to UV protection + uv paint to equipment + labeling ($300+).

But it would be wise to first replace all rerun after pump plumbing to avoid leaks ($300+).