Recommend minor service to gate to alllow self closing to occur.

I do see where markings present, especially in corners and walls, and there is significant leaf debris present on the surface, making it harder to identify issues that may be present.

I would imagine, though that the stains in the corners likely can be removed with treatments ($500+).

Otherwise normal for its age.

The waterline tile is all original = to me appears older than 20 years. Still I am seeing signs in some areas around the skimmer and the overflow that the mortar is due to be updated ($500-1k+).

Also there is calcium build that can be removed if desired for approx $550+

Algae present. Unusual water levels. Recommend treatments ($200-460) to resolve algae present. And re testing in 1-30 days to confirm water loss status.

Recommend MD cover updates ($100x2) for safety due to age and condition.

Also the skimmer is due to have its float , float o ring, and weir door (soon) updated ($300). Otherwise the skimmer is heavily chlorine burned.

None present in the pool. It is ready for a pressure side cleaner (Polaris 280/380/ Quattro).

There is a robot cleaner present. In fair / newer condition. Typically robot cleaners last 1-3 years at most, and this appears to be around 1 year old and has to be charged and removed and placed in the pool vs a built in as described above that is superior.

Older float, very much due for update ($125+).

It appears to be water or condensation present inside the light lens approximately 20%. Recommend a new light can ($600+) as well as install labor ($400).

At medium speed 2500 rpm we see a high pressure indicating the elements / filter is due for quarterly service ($150+) and possibly element updates ($500) - recommend service to confirm.

This pump is working, leaking drain plug due for service ($50) however its motor which is obsolete is heavily corroded and misformed due to salt conditions + high heat. I wouldn’t expect this pump to last longer than 1-2 years without it leaking. Recommend replacement to resolve ($1000-2600 (like pump Pentair i3 installed).

Working. Could not be fully tested to see no bottom cleaner being present.

There are no GFCI on the pump. There is a GFCI outlet. Recommend updating to
GFCI for safety ($300+ install by electrician ($350).

Recommend repair to the union ($200). Otherwise cannot be fully tested due to cold water conditions).

The plumbing appears to all be covered from UV, still, it should be painted and labeled ($200) and ideally covered from UV with the UV mesh ($50). Additionally, there is an older check valve ($200) that is due to be updated if desiring to use solar. There are two valves for the solar in one three-way valve for the solar. Those are likely due to be serviced as well ($300).