The surface is likely 4+ years old. There is one small spot on the entry shelf that has a rust color stain that is likely surface only, recommend minor treatment to remove / confirm ($50+).

Overall, the surface has no major issue seen. In the southwest corner and north east corner I do see some wear / in corners. The surface overall has modeling present common with age + salt. Otherwise without issue at this time.

Without issue. Some points for future attention but at this time appears water tight.

The water chemistry is not accurate due to the incredibly high levels of chlorine.

Recommend rebalancing ($200) and or rechecking to confirm levels.

The skimmer has some metal deterioration, this is likely similar to what’s inside the heaters core …which may have also reduced the heaters life by 50%.

Still this skimmer is due to have its parts updated to a weighted basket and likely a new float ($100).

All main drains are coming due to be updated soon (9 covers).

The cleaner is in working condition however it is overdue for service and update of parts ; tail, tires, hose, and more ($205).

Due for minor clean out of canister otherwise ideal ($10-20).

3 pool lights working.

Working with out issue.

The filter pressure is high during you syndicating. The elements are due to be cleaned and or serviced ($200) + elements are also likely older and due to the updated if original ($400+)

Without issue.

The booster pump hoses are heavily sun, beaten, and due to be serviced. Recommend replacement hoses ($200+) or hard plumbing ($450) which is most ideal.

This pump is in working condition without issue at this time. There is one slight issue on the pump lid opening. It is likely due for service ($200) which will likely include a new pump, O-ring and possibly a New Pump basket (due to age and condition).

This pump’s motor functions at this time. Recommend seal service / pump lid / seal plate / union ($100+) water seen pump seal / possible below pump seal.

This pump is in working condition however it’s Pump lid and basket are likely due for updating ($200) due to condition.

In good working condition, without issue during operation.

The gas line needs a drip leg added ($500) otherwise ideal at this time.

The Spa Jet Pump #2 is tripping the breaker / causing it to ark during use. Recommend new breaker ($150) + service ($150) to confirm issue is resolved after pump is also tested / repaired.

Otherwise the panel is working without issue at this time.

Recommend servicing the salt cell of calcium and confirming if it is still in working condition likely original 4+ years old. Is likely due for replacement ($600+) can not be fully tested due to water temp.

Recommend painting and from UV using a UV mesh ($50) or more ideally covering using a plastic shed.