A crack present, recommend repair ($2-5k+) it is difficult to determine the extend of the issue, but concrete decking is lifting away from this area. Unusual patterns.

Loose missing rocks / cracked mortar. Recommend re mortaring services to resolve and re structure / remove existing to prevent injury ($1500+)

Also recommend attention to the west side concrete walk way / coping. Gaps present. Likely due to under lying issue present - cost TBD. Recommend attention ($1500+)

It is likely the water quality is showing signs of water loss especially with a crack present.

Also there is alage present on the pools’ spa spillover wall. Recommend treatments to remove and resolve.
These chemical treatments will also help confirm if water loss is present.

The main drain covers appear to have been updated to a VGBA compliant cover / drain (always recommend a closer inspection to confirm).

The skimmer is working, on one side of the pool, high flow (likely one supply run to the equipment), even when the skimmer is full I am seeing some heavy turbulence indicative of too high of velocity / flow.

A new weir / float / float o ring / lid / etc is due to be updated soon ($100+).

Like new. Ideal condition.

Low on the wall of the shallow end. Leaking during use, likely showing signs of age and due to be serviced / updated ($125- 250).

The light can is older, likely “re-habilitated” with a new LED - since older I would expect less than another 1-12 months of life left in its current condition.

A new light can is $500+ install $400+

Non working, recommend new can ($500+) and labor ($400+).

Older, likely due for a new element (if older) and service to the tank o ring / pressure gauge / etc ($600+).

A new better filter = sand may cost $1-2k+

Overall ideal but some slight bearing noise, may be an indicator of it being programmed too high of speed for too long. Recommend minor adjustment of max speed no more than 2700 rpm to greatly prolong this pumps life.

Newer. Working. Recommend bonding ($100).

Working. Has signs of previous repair. Recommend a proper sediment trap on the gas line ($400) and plumbing bypass with automation ($500+) to help future proof this or the next heater.

Also a bonding wire added ($100).

Ideally swap breakers for the variable speed pump and pool lights plug + breaker to GFCI ($300+) for safety. M

Otherwise a very sun burned / older board (maybe 2004) in working condition. No signs of any other abnormality.

Note there is an antenna for a wireless remote but none seen. Still the cost for a new wireless remove it’s $500+

Working. Some leaks on some plumbing. Likely $500-2k in plumbing updates are coming due in 1-10+ years.

Otherwise immediate repairs $500. Preventative service to valves and check valves ($500+)