The fencing present was locked upon arrival access was through the garage door.

There did not appear to be any secondary forms of fencing or safety present.

The surface appeared to be without issue. Estimated age 4-15 years old.

The waterline tile all appears to be ideal except for one area = the east skimmer. This skimmer is showing signs of movement and issue. The temporary repair may be consist of filling in the gaps with rubberized / flexible products / filled in with new mortar ($1k+) but eventually this area will likely require additional re model ($3-6k) to attempt to solve this current movement issue.

Additionally the waterfall (Sheer decent) itself has some gaps present around the lip and should be filled in with some water proofing product ($500+) to avoid waster migration in this area.

Note on the ends of some of the concrete caps we are seeing movement happening and gaps forming that can also be filled if desired ($1k+).

On the west side of the pool concrete border to the decking there is raised lips that's are ready to cause tripping hazards. Recommend grinding and filling these areas ($1-2K)

No major issues, water loss seen on equipment pad, after service / repair recommend re testing water in 1 - 30 days to help confirm if water loss presence.

Also recommend adding some CYA to bring level to more ideal, especially next early spring ($100).

There are 10 main drain covers due to be updated for safety due to age and condition ($100 x 10).

Both skimmers will likely require some updates to the float, float o ring, weighted basket, maybe lids and weir doors if needed ($500x2).

Some minor attention should be applied to the cleaner, which will be a new tail sponge / possible one or two tires soon ($105 or less).

N/a

The filter is due to be serviced as it is currently leaking from what appears to be the tank o ring. Recommend service which may include replacing the tank o ring ($250).

The filter pump is without issue at this time. It is likely this pump is approx 10-15 years old. And could last another 20+ if well maintained (cleaning the filter every 2-4 months vs 6).

This booster is near new without issue. The hose is due to be modified / to avoid hose damaged during heater use. IF desiring hard plumbing for prolonged pump life expect a cost of ($400+).

Older, working, it has a small leak at the drain plug o ring = recommend minor attention ($50). Even though this is an older pump the bearing can be updated soon in the next 1 - 3 years ($500) to help prolong the life of this pump.

Working without issue.

Working without issue.

The valving is all working leak free but most valve bodies and actuators are due to be updated soon (1-5 years) = $1K+

Also recommend covering from uv using a uv Mesh ($50).