Dust on bottom. Otherwise without issue.

Spa spillover , waterfall, and rock work - overall will need re waterproofing / mortar attention soon now to 5 years ($1-3k+).

There are raised areas, gaps, and trip hazards present. It appears approx ($1-3k+) in grinding high edges and filling with mastic.

Medium level of Calcium build up present ($900+)

Also it’s worth mentioning the skimmer and connected decking appears to be 1” higher (which any movement can lead to water loss issues) if this movement is putting pressure on the skimmer to pool connection it may sheer and require replacement ($1-3k) if water loss occurs here (I feel this is the most likely location for leaks - if and when they appear).

Recommend attention to the water quality which may consist of draining a portion to properly balance ($250+)

This appears to be a functioning as a normal skimmer, but has the capability to be ran as a Venturi skimmer (which is generally, a superior skimmer) if high return flow is possible. Still to re activate this skimmer expect a cost of approx for service $250+

Otherwise recommend a new weighted basket and possible skimmer lid ($100).

Working, due for some minor parts updated (bag, tail, tires).

This fill is Running constantly. Likely related to a dirty valve / filler - due for service ($125-250+) vs leak compensation in pool / spa.

Likely element replacement is due ($500+) recommend service to confirm ($150).

Unusual start up sounds - may be related to an aging capacitor, that can easily be repaired at a service call visit ($200)

The heater does turn on an operate, it’s blower, It’s igniter, and it’s gas all function and this unit does turn on and heat for less than 30 seconds before it shuts off. This is typically caused by a low flow, which we are seeing as a result of a very, very dirty filter. Likely after the filter is clean this heater should work without issue. Otherwise a service call ($150+) would likely find and diagnose any issue.

Working.GFCI updated.