Older - but ideal. Blemishes expected with a surface this age. Wear seen on the surface throughout especially on the shallow end. Last 10-20% of its life cycle.

Waterfall has some water loss. Recommend new mortar soon ($1k+)

There is also some cracked concrete on the south side of the pool that could be filled / corrected ($500-1k+).

Waterline tile is all original and is wearing through It’s mortar layer, making it easier for organic matter to build up, in the next 1 to 10 years, recommend re mortaring ($500-1000)

There is some heavy algae seen on the water, light niche, recommend water treatments to help remove the organic matter present ($275+).

The main drain cover is slightly newer. The main drain itself is not VGBA compliant.

The skimmer is due to have its weir door, basket, float, and float O-ring updated ($500).

This unit is in working condition however its tail and some minor adjustments may be made to improve its efficiency ie hose floats + swivels.

The auto fill is leaking during use, recommend service to fill valve ($125-250)

Water present. Recommend replacement ($750+ install $400).

Filter pressure is slightly high (14-17 psi) recommend quarterly filter cleaning service ($150).

The filter pump is in like new condition without issue at this time, I would recommend service to the pump O-ring and likely the section side union ($100).

The timer is in working condition, but it is no longer being utilized as a timer, as the filter pump has its own built-in timer. Still the plug near the pool light should be updated to GFCI for safety, and ideally the breaker to the pool pump should be a GFCI as well ($350+).

The Pool equipment pad should be covered from UV using a UV mesh ($50). The pad should also be repainted and re-labeled ($100).