Surface is nearing expiration, cost to replace $8-12k.

Heavy wear in between tiles, due for mortar updates = $1500+

Some calcium build up ($750+)

And skimmer throat mortar due to be updated ($500+).

Also on the Backside of the water fall, recommend some attention to the water fall connection, its leaking, and will require repair ($1k+).

Water loss on equipment pad.

Recommend a 1/2 drain to properly balance the pool, possibly full drain ($500).

Recommend updates to the weir, float, float o ring, lid x 2 ($600).

Main drain covers x 4.

Damaged unit overall recommend replacement.

Leaking at return to auto fill connection, also recommend purging fill can ($250)

Water present , recommend repalcement ($950 light + install $350).

Recommend element + tank o ring service ($300) and or element replacement ($500+) + new pressure gauge assembly + gauge ($100).

Very hot motor, likely will fail in 1-3 years. Then replacement will run $800-3200. Recommend lid + lid o ring ($150)

Leaking return hose connection likely, recommend low cost repair ($200) or hard plumbing more permanent ($500).

Recommend updates to the gfis to gfcis ($650). Also recommend adding a smart light switch for the pool light ($150).

3 connection due for service, re painting and re labeling, and replacing leaking fittings ($1500). Also likely remove the in line frog ($400) as it appears to be leaking some / 3 way valve leaking.