The surface is heavily worn and likely through to the gun night seen mostly in the deep end in small patches. There is also a previous repair perform near the pool light that has calcium fishers coming through it (cracks). There’s also calcium fisher in the shallow end wall. It is likely this surface has less than 1 to 48 months of remaining life left As Plaster typically last up to 30 years, and it appears that this Plaster is likely older than that. Estimated cost to re plaster this Pool & Spa $10 - 15k

The Spa spill over tile has missing mortar present, There are missing tiles around the pool, mostly seen on the east side and spill over, and the skimmer throat / top , all is likely will need to be re mortared soon due to age and condition ($2k+).

There is calcium buildup present mostly seen on the waterline tile that can be removed for approximately $750.

The water quality is indicating that the pH is due to be modified and likely the CYA soon ($50), and algae removal treatments ($375).

Both main drain covers in the pool and two in the spa are due to be updated for safety ($100x3).

The skimmer is older, likely older than 20 years with chlorine wear present. Recommend updating the basket, float, float, ring, and lid $400.

The bottom cleaner is due for a new tail and likely some minor updates, which would include hose swivels and possibly tires ($105).

Working small leak present on fill valve handle, likely due for minor service ($10-20+).

The pool light is less than 25 feet from the light junction box. The pool light has obvious water condensation inside the light lens recommend updating for safety $700 can + install $400.

The spotlight has even more condensation present inside the light lens recommend updating for safety $700 can + install $400.

The filter is very old and likely due for updates ($750-3k+). Recommend service in the meantime Which may include new filter elements , Pressure gauge, etc ($500+).

This is a very old pump. Additionally, its pump lid is annoying and difficult to open and clean on a weekly basis. On top of that is vibrating heavily, indicating the motor is likely due for updating ($750+). To consider replacement instead ($1250-2800+).

This booster pump is relatively new less than five years old and in working condition. It is vibrating, though, indicating that the motor bearings are likely due for service ($500+).

Heater is older and no longer in functional Condition. A replacement heater would likely run $4800+ installed.

Recommend updating the panel to support GFCI for the pumps and the pool light ($500+).

This is older, copper plumbing appears to be approximately inch and a half. Recommend updating to be able to control flow from the pool and or Spa ($1500+).