The surface appears to be in good shape overall with very little to no blemishes present. Approx 7-15 years old.

The tile has little to no water line calcium build up present. No loose or missing. Some calcium on raised walls but minimal that can be removed with service if desired ($200+).

Cya is too high, so high approx 50% needs to be drained out ($200+).

Otherwise recommend minor chemistry adjustments ($50).

There is one main drain present, Therefore, this is not VGBA compliant, also recommend updating the cover for safety ($100).

The skimmer float, float o ring, and weighted basket are all due for updates ($200). Otherwise working older / chlorine burned skimmer.

Bottom cleaner is in Fair to poor working condition. Front drive wheel not turning 100% with other wheels, and back up valve with a delayed activation. Recommend service ($205+) but it would likely be wiser to consider a replacement option as this unit is in pretty distressed / older updated condition overall. Likely 6-24 months of life remaining. New unit “Polaris 280/380” is approx $600

The auto fill cannot be checked as the cover is very firmly installed, Recommend opening and cleaning this canister to verify status ($10).

Even though the pool light does turn on and look relatively new, it does appear that there is an ever so present condensation layer on the inside of the light lens. If so, recommend a replacement can ($900 installed).

Filter pressure is very high, indicating the elements are likely due for replacement soon ($500) as well as the pressure gauge ($50). Otherwise, this filter is in fair / poor condition overall.

Filter pump is in like new working condition without issue at this time.

Booster pump is in working condition, It does have a very minor leak on the return side of the pump that likely can be easily repaired with service ($200+). At that time, it may be wise to consider upgrading the hoses from soft to hard plumbing instead to help prolong the life ($400).

The timer has a dual timer set up that is bypassed to work with the automated Suntouch controller. All in ideal working condition.

The breakers installed are not GFCI should be for safety as well as adding a water bond ($600) to bring it up to code standards.

The valving present is all in working condition without leaks except for one valve (waterfall). The two solar check valves will likely need updating soon ($600). Equipment pad will also need to be painted labeled and ideally covered from UV using a UV mesh ($300). There are five three-way valves that will need to be opened and serviced. One is currently leaking and the rest will leak soon if they are not serviced ($800).