The outside gate is in working condition. The perimeter of the pool gate does not self close at 10% or less.

The surface is likely older than 20 years old. There is mottling present. There are scratches / blemishes seen in the deep end step. On the shallowing step face, we are seeing Plaster wear.

The raised waterfall has areas where mortar is needed, including areas where it is cracking recommend minor waterproofing service ($500-1k+).

Recommend adjusting the CYA levels and also doing treatments to eliminate organic matter ($205+).

There are three main drain covers installed, All three appeared to be due for replacement ($100x3), one is nearly off.

Recommend a float , float o ring and weighted basket ($300).

Note the skimmer has alot of chlorine yellowing present.

The tail is nearing expiration, also the unit is due for minor service, it appears that maybe the band is loose and so the wheels are not turning as stable as they can - service should resolve this issue ($205).

Not present.

The pool light does appear to be turning on at this time, still water may be present inside the light lens. Note there is a lot of organic build a present on the outside of the light lens, Making identification a little more difficult. Still due to the age of the light and how relatively dim it is, It is likely the light is nearing expiration (1-5 years or less) And therefore replacement may be required soon ($700+).

The filter is working, but older, and due for service soon ($150+). Surprisingly no leaks. New gauge. Fair condition overall.

The filter pump is likely 5 to 12 years old and in working condition at this time without issue. Recommend a pump lid, O-ring service and a new pump basket soon ($100).

Note this pump may have another 1-5 years of remaining life before replacement will be required ($1200+).

The timer is no longer being used, The pump has a built-in timer.

The breakers to the variable speed pump should be updated to the variable speed breaker ($150) and GFCI for the pool light ($100).

The solar controller is in working condition, It is showing an error on the solar sensor ($250). Otherwise, the actuator functions well with that issue. Note I ran the solar for 10 minutes and from two stories below I am not seeing any major leaks present at this time, but it is also an overcast/sprinkling rain day. Recommend Service to confirm ($250+).

Equipment pad is due to be painted labeled and covered from UV ($300+).

There is an active leak that is very small on the return section between the filter pump and the filter That can be repaired ($300).

There are five three-way valves that will need service soon ($700+). There is a check valve that will need to be updated soon as well ($300).