Some blemishes present found in the shallow end step edge, middle shallow end, deep end step (check cracking), mottling throughout.

The surface overall does have mottling present, and wear typical for a pool older than 15 years. But the surface FEELS 2-5 years old. Therefore it’s likely a newer plaster job that has been overly chlorinated / higher ph for prolonged periods of time.

The tile is in good condition overall without issue present. To me, the tile looks relatively new less than five years old or recently cleaned.

Recommend modifications to the ph and alk and lowering the chlorine levels to ideal parameters $50.

The two main drain covers are due to be updated for safety. 88 x 2. They are not compliant.

The skimmer has high flow issues and should not be ran more than 50 gpm max.

The skimmer needs its float o ring and weighted basket added ($50)

Recommend adding an in line leaf basket ($100) otherwise ideal working condition.

Could not access auto fill canister - screwed closed.

Working Condition. Like new.

The filter is indicating the pressure is nominal for a newer element. The pool is clear, indicating the filter is optimal. Older filter. But working.

Working pump with (two speed) variable speed motor. Working without issue.

Working timer, with updated variable speed breaker.

The two auxiliary breakers are due to be updated to GFCI ($50+) and a water bond added ($100) + installation $300 for safety.

The Valving present is in working condition without any leaks. The plumbing is heavily sun, damaged, and due to be painted and labeled ($300) And ideally covered from UV ($50).