The surface appears to be a paint over a plaster surface. The paint appears to be nearing the end of its life cycle and will likely need to be pressure washed off and repainted soon ($1500+). Vs re plaster ($7-9k+).

Around the majority of the east side of the pool, the tile is compromised and likely due for repair and updating ($2500+) Which is recommended to do on the remaining tile as well ($1500+) as it all looks nearly due.

The coping concrete stones around the pool are also loose and due for remounting / Re-mortoring ($1000).

On the northwest side of the swimming pool deck and near the skimmer, the concrete has settled down and created a trip hazard. This can easily be grinded down ($500+) to prevent tripping injuries.

The water quality in the pool is in fair to good condition. Recommend minor ph lowering adjustment and raising cya ($100).

Note that the water quality indicates there is organic matter living in the pool as well as I am seeing organic matter around the skimmer recommend treatments to resolve ($300+).

The main drain in the pool is not VGBA compliant but the cover is, recommend updates during the Plaster stage ($300+).

The skimmer is missing its float and weird door. Recommend updating those as well as a weighted basket ($400).

There is no bottom cleaner present recommend a Polaris 280 or 380 ($650+)

There is no auto fill present, just manual fill, leaking during use recommend repair ($125+). Recommend adding at least a hose driven one ($125-250+).

Recommend replacing the light can ($575) as well as labor ($425).

The filter is operating at five psi Likely indicates the filtered has no media inside of it recommend adding media / service call ($155+).

Recommend adding a bonding wire to this pump for safety / water bond ($250+). This pump is in working condition

This pump is in working condition condition without issue. Also note that this pump has a ground connected, but not a bonding wire ($50+).

Both timers are an ideal working condition. Recommend updating the breakers to GFCI For safety ($200+).

Equipment pad is due to be painted labeled and covered from UV ($300+). Otherwise, no water loss is present. Also recommend adding a backwash port and/or hose ($100+).