The surface appears to be in fair to good condition overall for its age 15+ years old.

On the step faces and it does appear that we have algae presents specifically on the second and third steps - Or this could simply be an effect of high chlorine over prolonged periods of time - I still feel it’s algae.

There is chlorine that has been added to the pool and left to dissolve on the plaster surface. This is not ideal, but should be completely dissolved into the water and not left on the surface to damage it. This could also be a CYA chemical and added to the pool vs the skimmer where it should have been added. Either way recommend attention to remove material to avoid surface damage.

There is some excess wear seen in the north west bottom of the pool.

Overall, the surface does look to be in fair condition for its age.

The tile is an ideal condition overall. I do see some algae in between some of the tiles. I also see a very light calcium buildup present on this tile surface likely can be removed for $450+ if desired.

The water quality indicates that we do have some new water present, Additionally, I am seeing a leak on the equipment pad at the filter drain plug, Recommend balancing calcium hardness level ($20).

Also note with the algae present recommend eliminating by doing a proper treatment ($375+).

There are three standard size main drain covers. And there is one in floor cleaning system cover. Due to age and condition, all covers should be updated for safety ($500).

The skimmer has an older weir door. But its float and basket are present.

It would be ideal to update the skimmer lid times three (waterway) float, float o ring !, weir door and a weighted basket ($550) as they are due to be updated.

The floor cleaning canister parts appears to be nearly new And a simple service to the lid O-ring may resolve the air bubble present ($10).

The seller indicated he feels that if water loss is present it’s likely in the skimmer - if so a skimmer repair / replacement would be $1500-3500+.

The floor cleaning system appears to all the original. The heads themselves generally required to be updated every 15 years+ - currently the heads are sticking up. Each head is approximately $40 x 10+ and requires installation + $250. The in floor cleaning gearing system on the equipment pad requires attention every 5 to 15 years - It also appears to be original with little service performed to - Recommend updating the pressure gauge and confirming if there is water loss occurring at this unit via service call ($150+).

During the inspection, the auto fill has been running continuously Generally, indicating water loss is present. I did witness water loss on the equipment pad, but the water level in the pool is noticeably lower than normal (calcium build up).

The LED white pool light ($750+) appears to have water presents inside the light lens. Recommend updating for safety ($450 service).

Note if newer than 3 years is covered under repalcment warranty (800) 831-7133 Pentiar

The filter is older and very well sun beaten - It is likely the filter shell will only last up to another 10 years before leaks will occur on the tank itself.

The filter is due to have its elements serviced, Drain plug O-ring serviced and identify where the leak that is currently leaking from the filters is coming from - Appears it is currently coming from the drain plug, but the tank itself underneath ($300-1500+). It is likely the filter is due for a new element set ($450+) as we are at 2300 rpm and 12 psi. Also the unions on the intake appear to be leaking at the PVC connection - $400.

Note I would recommend replacing this entire filter due to the current condition of it vs updating it with repairs / elements. My recommendation for an update is the Pentair TA100D filter ($1500+) for this application vs service and repairs ($1000+).

Without issue.

An updated Pentair breaker for the variable speed filter pump and recommend updating the Older GFI and GFI for the breaker of the pool light ($150+). Also adding a water bond ($400).

The valving present is all in fair to good condition. Recommend painting and relabeling as it is due ($300) And also covering from UV, even using a simple UV mesh ($50).