The surface appears to be newer - approx 12-48 months old. A blemish found on the east wall. Some decorative concrete flakes found inside the pool steps / around the pool. Overall in good condition.

Like new without issue waterline tile.

The concrete coping border around the pool has some areas that should be grinded down / filled in with mastic to avoid trip hazard / injury hazard during use ($1500+). This may include removing the hand rails exiting the pool that would constitute a trip hazard especially at night with no lights present.

Also note that the concrete has had some decrative flakes added to the surface and may require another sealant layer to hold these pieces onto the surface as intended. It appears to be flaking off quickly and this is likely not the idea during installation ($750+).

Recommend adding CYA ($100) otherwise ideal water chemistry.

There is no main drain present. Just a skimmer and what appears to be an equalizer line.

The skimmer has all parts present.

The units hose is too long and due for some trimming and minor adjustments.

No auto fill present.

Without issue. Ideal physical condition. Recommend a filter cleaning as it is due ($105). Approx 17 psi during operation due to also a return style bottom cleaner aka back pressure.

Also the filter should be attached to the concrete due to style of filter ($250).

Near new in ideal working condition. Recommend installing a bonding wire ($100) and or a water bond ($400).

There is no timer installed instead just a power supply shut off that supplies power to a variable speed pump that is typically used for an air conditioning unit. The pump has a built in timer on board.

I would recommend installing an appropriate Siemens variable speed breaker + sub panel box to this pump for safety ($500+).

The GFCI plug breaker is present on the wall of the home.

Valving and plumbing is near new , uv painted, just recommend minor labeling service to designate functions ($100).