The surface is older than 15 + years. In damaged / fair condition overall. There is a rust blemish present in the middle end step that will need repair ($2-3k+). There is a structure crack in the middle south end of the pool that will need repair ($3k-6k+). There is pitting wear present on the deep end wall.

Both cracks present are showing signs of water loss and repair ($9k + replaster $10-13k will be required soon) = $22k.

Note: There are some rust stains in the deep end north mid wall as well - recommend additional confirmation on this blemish.

The waterline tile is in fair condition, older, but without issue.

The coping all appears to be in fair condition.

The concrete that meets the border is due to be grinded down due to trip hazard and filled with plastic ($1500-3500+).

At first glance it appeared that there may be settling issues hence why we see structure cracks in the pool and coping / concrete lifting = usually large signs of this. But upon closer look the levels from one side of the pool to the other does not appear much different. Still it is a red flag for settling issues.

The chlorine levels are slightly low and the pH and alkalinity levels are high recommend minor water treatments to resolve issue ($100).

There is algae present recommend treatments to remove.

The main drain cover is due for updating due to age and condition.

The skimmer is heavily chlorine damaged. The skimmer may be required to update upon Plaster Due to condition.

In the meantime, the skimmer is due to have its parts updated, which will include a new float, weir and weighted skimmer basket basket ($300).

The cleaner is operating but due for service (back right tire not turning), as it is not operating ideally. It will likely need a new tail, tires, and bearings soon ($105+). Otherwise note a new cleaner is $550+).

There is no manual or auto fill present. Recommend adding an automatic filler if possible via a garden hose ($125-250+).

The junction box is located under the diving board. Recommend updating this box to a different location for safety ($500-1500+) and or also updating the gfi here

The pool light itself due to age and condition should be updated due - water present under the light lens = $400+ light + install ($300).

Even though this filter is not losing any water, it is still exposing its innermost material for foundation. It’s fiberglass core. I wouldn’t anticipate this filter has no more remaining life and should be updated ASAP for safety ($750+-3500). Note it appears to be ready for a new element / pressure gauge ($250) but I would not put any additional repair money into this filter vs replacement due to age and condition.

This pump is working, slightly over worked due to smaller plumbing size. This pool is very under sized plumbing for the pools size. This will over work a filter pump. Currently the motor is very hot indicating low efficiency and additional un needed wear. A variable speed here would be more ideal ($1200+) current pump is not
Bonded. Recommend water bond ($300).

Leaking at water chamber - known defect - likely replacement will be required ($1250+) in 1-24 months or less.

A new dual timer, sub panel box is $500 and would be a benefit in this application.

Current timers function but missing covers / gfi. Recommend updates for safety.

All older copper Valving. Will need to be updated as it is undersized for this swimming pool. Due to sizing you will
Need to run the pool longer to compensate.

Eventually, you will want to update the Pools plumbing from copper to pvc ($5k+) Which hopefully will include the equipment pad as well.