Most of the wear present is located in the shallow and steps and around the deep end section. We are nearing failure of the surface and will require new plaster soon ($8-15k+).

I am seeing calcium fishers forming on sections of the tile, seen on the majority of the tiles throughout the entire pool approximately at every juncture of stone coping. Recommend attention to resolve ($500+) ie cleaning to determine how deep the issue may be as it appears to only be a surface stain of calcium vs a crack that is leaking water through, still minor service can confirm this finding ($50) then sealing this area to prevent future build up ($450+) or re grouting ($500+).

I do see water loss present on the filter leaking at the o ring currenlty.

Otherwise water balance is currently ideal for conditions.

The skimmer is older than 35 years, smaller plumbing size, repairs performed / skimmers compromised - it has reached its useful life. At the re plaster stage recommend installing a new skimmer ($500-3500+) independent from main drain line as it’s best to be done at that stage. It will help the circulation greatly.

All parts are present for this skimmer. And operating. But likely due for updates ($300+) ie new weir door / basket / skimmer lid etc.

Nearing expiration. Recommend a different unit ie Polaris 280/380 etc when upgrading.

In distressed shape, recommend updating - currently running longer than required / float not functioning correctly. New unit approx 60-150+.

The light is older and dim compared to normal. Likely due to age it is due for replacement ($500+ light + install ($350).

This unit unit is leaking during use recommend minor service to the Filter elements ($150) As well as a replacement tank o ring ($50) and o ring set for this filter ($100) + new pressure gauge ($50).

The motor is having difficulty on start up, indicating that the capacitor is likely failing, and this pump will need some type of service to restore its normal function / I would begin with a new capacitor repair ($250+) and then new bearings replacement service ($500+) vs a replacement pump ($500-2900).

Without issue.

There are two timers present. They are each in their own individual boxes. One timer is older and its box is heavily worn, and the other timer has a new timer internal in it, which is not working correctly It would likely be the best recommendation to replace these two timers and boxes with a single timer in box And update the breakers to allow future expansion to occur ($550-750+).

Note that there is a landscape lighting box on the lowest portion that appears to still be connected to some type of landscape lighting present. It looks like it’s in relatively poor condition.

There is no valving present, but there is copper Plumbing present. During the replaster stage it will likely be the best time to re-pipe the pool with PVC ($3-5k+).

Currently recommend covering pad from UV ($100).