The surface looks nearly uniform and smooth. Some wear seen on bottom and steps. Some blemishes found in the middle deep end area. Likely from scratches and acorns (oak tree nearby) staining can be removed with service ($205). The surface is likely 15+ years old.

Near the skimmer I am seeing some gaps present that will need to be filled in with mortar / plaster $205.

Overall the waterline tile is in good condition. Some calcium build up that can be removed with service ($450).

Also there are some loose decking / coping that will need to be re mortared ($1500+ coping or $3000+ all decking missing mortar / cracked areas around pool).

Recommend modifying the chemistry to realign with ideal ($200).

Recommend a new cover for the main drain ($100).

Recommend a new float o ring , weighted basket, and weir ($300).

Working unit but a tune up is required + tail ($105+).

Ideal float. Recommend cleaning out the can ($10).

Water present inside the light lens. Recommend repalcment (light $1200) install $550

It appears the tank O-ring is likely do for minor service ($150) and at the same time the filter element could be cleaned to verify their status, and if replacement will be required ($450+).

Recommend updating the pump basket and likely very minor service to the pump lid o ring + drain plug o ring ($125).

It appears the front end of this pump has been updated recently and therefore is likely an ideal working condition for sometime.

Ideal working in Panel and Breakers. It is likely the GFCI plug will need to be updated after the new pool light is installed ($125).

The pool plumbing will need to be repainted and labeled soon and the temperature sensor will need to be re-applied to the piping and corrected ($500).